Change the edge profile of your project

When using a try square its is important to make sure

Your brass edge is tight against the edge of your material

A Tri Square is used to?

Create perpendicular or 90 Degree Angles

When using the drill press I ALWAYS need to

Clamp my material down securely

American Standard Systems refers to

Measurement in 1/16ths, 1/8ths, 1/4ths, 1/2

studbud

Industrial Arts Safety Rules and Skills!!!

18 termsStudBud Administration341 plays

Test your knowledge of the safety rules and applications you have been working on since you started Technology Education at NEMS!

Flashcards18 cardsFPractice quizPHost liveL

Questions 18

Answers

1
Files work in what direction?
Backward
Sideways
Forward/Backwards
Forward
2
A Router is used to?
Connect you to the internet
Change the edge profile of your project
Cut material to final length
Get you a hot date
3
What room are you currently in?
D106
B106
D107
D105
4
When using a try square its is important to make sure
That you brushed your teeth in the morning
That you have a pencil
That it is held securely in your dominate hand
Your brass edge is tight against the edge of your material
5
When in the wood lab I always need to wear
Safety glasses
My emotions on my sleeve
Jordans
Gloves
6
A Tri Square is used to?
Play Call of Duty
Create perpendicular or 90 Degree Angles
Scratch your back
Hold material together
7
When Sanding you always sand..........
Around the grain
With the grain
Under the grain
Across the grain
8
To remove cut marks from my project I would use
Router/Radial Arm Saw
Files/Sandpaper
Drillpress/Mr.Gough
Boss Laser Engraver
9
When cutting a curve I should always..........
Cross the cut line with my hands
Back out of the cutt
Use relief cuts
Close my eyes and pray
10
On Sandpaper the Higher the Number the
The Finer the Grit
The smellier the Grit
The uglier the Grit
More Course the Grit
11
I can use the bathroom in the first ten minutes of class?
False
True
12
Boards dimensions are always given in what order
L X W X T
W x T x L
W x L x T
T x W X L
13
When cutting to final length you would use
Radial Arm saw
Cross Cut Saw
Jig Saw/Scroll Saw
Butter knife
14
When using the drill press I ALWAYS need to
Firmly hold down material with your hand
Clamp my material down securely
Do the dirty bird!
Cross my arms to pull down lever
15
When using a cross cut saw you are cutting to
Cutting class
Thickness
Length
Width
16
American Standard Systems refers to
Measurement in 1/16ths, 1/8ths, 1/4ths, 1/2
Measurements in Km, M, CM, MM
Measurement of how fast your hair grows
Measurement of our finger nails
17
Gluing multiple pice of material together is called
Joining
Compound
Laminating
Eng Grain
18
What is the length of the long side of your box?
8"
7"
9"
5"

Industrial Arts Safety Rules and Skills!!! Flashcards | StudBud