Safety Module-BBIA

Question 1

Agency created to save lives, prevent injuries and protect the health of America's workers

Accepted Answer

OSHA

Question 2

Hole covers must be strong enough to support __________ the weight of anything on top of them.

Accepted Answer

twice

Question 3

before working in a(n) ______ you must be trained, have a permit, and take necessary precaution

Accepted Answer

confined space

Question 4

The box for a switch used to regulate and distribute electricity in a room

Accepted Answer

switch enclosure

Question 5

a good _____ helps to prevent or correct conditions that can cause accidents.

Accepted Answer

management system

Question 6

which ladder is self-supporting with two sections hinged at the top

Accepted Answer

step

Question 7

to prevent a cave-in, follow OSHA regulations for ______ up a trench.

Accepted Answer

shoring

Question 8

number of days an employee has to file discrimination with OSHA.

Accepted Answer

30

Question 9

An example of an unsafe condition at work is:

Accepted Answer

inadequate lighting in a hall (its really dark)

Question 10

Never look at the _____ caused by welding without proper eye protection.

Accepted Answer

arc

Question 11

the most common grounding system used to protect against accidental shock

Accepted Answer

three-wire

Question 12

companies with a strong safety culture enjoy ______.

Accepted Answer

better morale

Question 13

The ______ provides clean air for breathing in a SCBA

Accepted Answer

respirator

Question 14

Manufactured and rolling are two basic types of _____.

Accepted Answer

scaffolding

Question 15

a man-made cut, cavity, trench, or depression in an earth surface, formed by removing earth

Accepted Answer

excavation

Question 16

when welding, what color is the oxygen hose?

Accepted Answer

green

Question 17

A(n) ______ has proven their extensive knowledge, training and experience.

Accepted Answer

qualified person

Question 18

Set up a proctective ______ when welding with other workers present

Accepted Answer

welding screen

Question 19

because _______ materials catch fire and burn easily; remove them regularly from the work area.

Accepted Answer

combustible

Question 20

a narrow excavation or _____ ;below ground, generally deeper than it is wide.

Accepted Answer

trench

Question 21

When you step off the ladder onto the roof, the top of the ladder should extend ___ feet above

Accepted Answer

3

Question 22

This non-adjustable ladder has two rails, rungs between rails, and safety feet at the bottom

Accepted Answer

straight

Question 23

which of the following is life treatening?

Accepted Answer

Heat stroke

Question 24

When fuel reaches the _____ temperature to emit enough gases to burn

Accepted Answer

flash point

Question 25

if welding/cutting fuel/gas is improperly mixed, it can cause a(n) _______.

Accepted Answer

flashback

Question 26

the horizontal member at the top of all scaffolding & platform work spaces

Accepted Answer

top rail

Question 27

OSHA rule requiring all contractors to educate employees about the hazardous chemicals at work

Accepted Answer

HazCom

Question 28

a(n) _____ is caused from even a brief exposure to the ultraviolet light from arc welding.

Accepted Answer

flash burn

Question 29

_____ for welding includes: a face shield, ear plugs, and long, heavy gloves

Accepted Answer

PPE

Question 30

the process of joining metal pieces by fusion

Accepted Answer

arc welding

Question 31

an opening in a wall or floor is a safety hazard and must be either _____ or covered.

Accepted Answer

guarded

Question 32

a formal procedure for taking equipment out of service and ensuring it cannot be operated.

Accepted Answer

Lockout/Tagout

Question 33

The general construction rule that states fall protection is required any time you are 6' above

Accepted Answer

six foot rule

Question 34

Refer to the _____ to learn about how to handle hazardous substances & goes with every shipment

Accepted Answer

MSDS

Question 35

When climbing a ladder or scaffold, use a _____ or tagline to pull up your tools.

Accepted Answer

hand line

Question 36

Measure the probability, consequences and exposure on a job site analysis measures ______

Accepted Answer

risk

Question 37

Benching systems cannot be used in ________.

Accepted Answer

Type C soils

Question 38

large enough for work, but limited entry or exit; sometimes a permit is required

Accepted Answer

confined space

Question 39

The _____ on a scaffold is placed halfway between the toe board and the top rail.

Accepted Answer

mid-rail

Question 40

to prevent ear infections, clean foam earplugs regularly with

Accepted Answer

soap & water

Question 41

to protect yourself, while working near moving vehicles & equipment.

Accepted Answer

wear a reflective vest

Question 42

When working 6' or more above ground, your harness must have a(n) ____ attached to an anchor.

Accepted Answer

lanyard

Question 43

When doing _____, you must be careful not to come into contact with the hazard.

Accepted Answer

proximity work

Question 44

where should the D-ring be on your safety harness

Accepted Answer

between shoulder blades

Question 45

Your harness (personal fall arrest system) should be inspected monthly by:

Accepted Answer

competent person

Question 46

A vertical barrier called a(n) _____ is used on scaffolds to prevent falling tools & materials

Accepted Answer

toe board

Question 47

SCBA is an example of a(n) _____; the assembly of machines to do a job.

Accepted Answer

apparatus

Question 48

To prevent a cave-in, treat all soil like it is _____

Accepted Answer

type C

Question 49

If you are operating a vehicle on a jobsite and cannot see your rear, get a(n) _____ to direct

Accepted Answer

signaler

Question 50

the highest safe standing level on an extension ladder is which rung from the top?

Accepted Answer

4th

Question 51

If a work area has been _____; it has material at least 2" thick and 6" wide for flooring

Accepted Answer

planked

Question 52

on scaffolding over 10 feet, use _____ , diagonal from bottom to top of another rail to support

Accepted Answer

cross-bracing

Question 53

A yellow and purple warning barricade means __________.

Accepted Answer

radiation hazard

Question 54

when using power tools, make sure you have a _____ protecting the circuit.

Accepted Answer

GFCI

Question 55

The _____ is the waste material from welding operations

Accepted Answer

slag

Question 56

identifies unsanitary, hazardous or dangerous working conditions and the authority to correct

Accepted Answer

competent

Question 57

store _____ liquids in safety cans to avoid the risk of fire

Accepted Answer

flammable

Question 58

use only approved _____ for electrical plugs

Accepted Answer

concealed receptacles

Question 59

The minimum tint for a welding mask, goggles or hoods:

Accepted Answer

No. 4

Safety Module-BBIA

Questions 59

Safety Module-BBIA

Questions 59