Block 1, Practice Appraisals (Combined)

11A. Wiremaps and Delay skew are two of the possible advanced features you could find on a Connectivity Test Set

4A. The application layer (OSI Layer 7) is farthest away from the end user. (True or False)

5A. Convert CF1₍₁₆₎ to its binary equivalent

10A. The first thing you should be aware of when troubleshooting a problem is that the symptoms are not the problem.

6C. Data that is sent with no guarantees that the data will reach the recipient describes what type of communication?

7B. _________ is the communication point between Access Layer & Core Layer in Cisco’s hierarchical internetworking model

9A. Also known as a name, what IEEE 802.11 wireless network standard tells you what network to join?

2C. Affected equipment will sometimes work correctly and sometimes not describes what type of ESD damage?

11A. When a technician needs to locate a single cable in a large bundle of cables, what would be the appropriate tool?

11A. If a technician needed to secure or resecure cable ends on a copper cable what should they use?

2A. The primary functions of Grounding are: equipment protection, personnel safety, and electrical noise reduction.

9C. This type of access point does not make forwarding decisions, but passes data to the Wireless LAN Controller (WLC)

8A. Which of the following is NOT one of the basic functions of Network Monitoring Systems?

6C. _________ is used when speed is of primary importance.

5A. A subnet is a logical division of a network of connected devices based on _____________.

9A. What does a Wireless Local Area Network (WLAN) utilize to join two or more devices onto a network?

8A. The Alert Network Monitoring System function

5A. Which of the following numbers are written in hexadecimal format?

8A. ________ looks for signatures of known attacks or deviations from normal activity

12C. Which of the following is FALSE regarding wireless transmissions?

2B. Establishment of a low-impedance path between two metal surfaces describes what?

6D. Well-Known ports, also known as system ports, range from

8A. The _____ function in a Network Monitoring System is used to visualize the network?

10A. What is based on idea that effective management should solve the underlying problem instead of treating symptoms

12A. What is NOT one of the configurations found in the T-568A/B pin out standard?

2D. Which of the following is an example that would be require a No-Lone Zone?

6B. Which of the following are features of Transmission Control Protocol

5A. When you have multiple subnet masks on one network, it is said to be a

12C. ________ are easier to jam than spread spectrum signals and transmit on one set frequency

4A. Electrical impulses, light and radio signals are used to convey data on the _________ layer

10A. In which step of troubleshooting methodology do you record problem findings and solutions for future use?

5A. Convert 1110₍₂₎ to its decimal equivalent

5A. Convert 471₍₁₀₎ to its hexadecimal equivalent

5A. Which of the following represents a Class A network?

2C. What is the sudden electric flow between two electrically charged surfaces?

2D. Physical security requirements for a particular facility are primarily dependent on several things, including

10A. Being the first step in troubleshooting methodology, this where you find what is causing the symptoms to manifest

4A. The router, which is known as a "layer 3 device", resides on which layer of the OSI model?

5A. Which of the following is a correct representation of 255.255.255.192 in Classless Internet Domain Routing notation?

11A. __________is a software troubleshooting tool that will display and allow editing of the local system routing table

2A. Shutting down the affected circuit whan a dangerous electrical current is detected is performed by what equipment?

11A. What does a Light meter check for?

2A. Which of the following are methods of electrical noise reduction?

2B. Which type of bond which is generally welded or brazed and is expected to remain intact for the life of the system?

9C. Which type of access point is installed without authorization on a secure company network?

6D. Registered virtual ports are in a range of 1024 to 49151 and are assigned by Internet Assigned Numbers Authority.

8A. The Monitor NMS function provides administrators with Ping availability, latency, CPU, and memory status

6D. Which organization maintains and assigns port numbers for specific usage?

7A. The sole purpose of the Core layer of Cisco’s hierarchical internetworking model is:

2C. Which of the following is NOT a category of failure caused by ESD damage?

2B. Bonds between unlike metals are highly susceptible to _______.

9A. Which of the following statements regarding wireless networks is False?

12C. By superimposing information onto an RF Carrier, ___________increases power and range of the signal.

5A. A number that is written in "base 16" has been written in what numbering system?

5A. Which of the following is a valid Internet Protocol version 4 (IPv4) address?

12B. Which of these is NOT an attribute of fiber-optic cables?

8A. Simple Network Management Protocol (SNMP) is critical for the functionality of Network Monitoring.

12C. _________ are more difficult to jam than fixed frequency signals and transmit across a broad frequency bandwidth

2A. Earth electrode, equipment fault protective, and signal reference are all subsystems to what?

12A. Which is NOT a benefit of using Shielded Twisted Pair (STP) cable

2A. The ____________ refers to a conductive sheet or grids that places all points on the network at the same potential.

2D. A special access badge and a purpose to be in an area describes what type of area?

9C. Autonomous access points have all software required to manage WLANs with no need for controllers or switches.

4A. Operating systems such as Microsoft Windows and Linux would lie at Layer 6 Presentation layer of the OSI model.

11A. If a technician wanted to check for a break in a fiber line, what would they use?

4A. Web browsers such as Chrome, Firefox, and Edge are found at which layer of the OSI Model?

5A. Dotted decimal notation is the format for this type of address ________.

5A. Convert 71₍₁₆₎ to its binary equivalent

6B. Guaranteed delivery of information would best describe what type of protocol?

9B. The most common example of a PAN, ________ is a global 2.4 Ghz for short range wireless communication

11A. If a technician wanted to test a Wi-Fi’s signal strength on a job site what would they use?

6C. User Datagram Protocol is found at the transport layer of the OSI model.

4A. Which layer of the OSI Model sets up, coordinates, and terminates connections between the applications on each host

2C. Immediate total failure of the affected equipment describes what type of ESD damage?

2B. Bonding straps must be mechanically strong and

2B. With the exception of high-vibration environments, which of the following is preferred for indirect bonds?

2C. Which of the following is NOT a proper handling precaution for Electrostatic Discharge Sensitive items (PICK ONE)

5A. Which of the following is a Class B IPv4 address?

4A. Home of the operating system, this layer translates data from application to network format and vice-versa.

5A. Which of the following is a valid Internet Protocol version 6 address?

5A. Convert 11001110₍₂₎ to its hexadecimal equivalent

2D. Your main role in facility security requirements is knowing the requirements for your unit of assignment and _______

7C. _________ of Cisco’s hierarchical internetworking model deals with users directly connecting to the network

12A. How many insulated wires are found in Unshielded and Shielded twisted pair cable?

9A. Some devices on a Wireless network may also be connected using Ethernet cables? (True or False)

9A. IAW IEEE 802.11 wireless network standard, ______is a collection of wireless networking devices with same parameters

5A. Internet Protocol version 4 (IPv4) subnets are created by borrowing bits from the host portion of the IP address.

7. There are___ layers in Cisco’s hierarchical internetworking model

2A. What type of hardware is NOT part of the earth electrode subsystem?

4A. On the network layer of the OSI Model utilizing ARP, IP addresses are translated into ________ addresses.

4A. What are the Seven Layers of the OSI model?

2A. Total opposition to current flow within an electrical circuit is called _____________.

5A. Written as a subscript, the ____________ identifies the number system and identifies the quantity of Arabic numerals

2A. In multipoint signal reference subsystems, equipment cabinets are commonly bonded to a common interior sheet or grid

7. Cisco's internetworking model consists of which layers?

2A. What is a conductive path for reducing the possibility of shock/static buildup between the earth and ground?

11A. If a technician wanted to observe the frames on the network, what should they use?

8A. What NMS function provides real-time and historical network status reporting?

9A. This piece of equipment connects to a wired router or switch and is critical to a wireless network

2C. One general precaution is to avoid testing ESDS devices with a multimeter.