becc test #6

which of the following is an acceptable fuel substitute for F-76?

where does re-purified fuel get sent after purification?

separates intermixed water and oils including fuel so that the water can be discharged overboard and waste oil stored

what is a reliable indication of contamination by a highly volatile product such as gasoline?

how can the gear meshes on the synchronized self-shifting (SSS) clutch be observed?

what provides the gas turbine engine GTE a thermally and acoustically insulated structure?

the cooling medium for the Auxiliary propulsion system APS equipment is what

what is the final disposal process for fuel-contaminated waste generated aboard ship?

who completes the daily fuel and water report?

what component of the synchronized self-shifting SSS clutch engagement sequence?

how many fuel nozzles are on the LM2500?

what combustion event does the fuel ignite due to high temperature and pressure the cylinder

what do atomizers do?

what is the biggest hazard with shipboard fuels?

what type of error is energizing a misaligned system

what procedure must sailors' reference when performing system alignments?

how many auxiliary propulsion systems APS are provided for each shaft?

which boiler casing is lined with refractory material?

how many revolutions does the crankshaft make for each complete cycle in a four stroke diesel engine?

what coverts the reciprocating motion of the piston into rotating or rotary motion?

transformers are what type of component?

what term refers to the absence os visible suspended water in a sample?

what tanks hold enough purified fuel to provide a steady flow to the propulsion turbines and the generator fuel tanks?

what component keeps the turbine´s rotating shaft from sliding back and forth along its axis?

what phase of the steam cycle is water is boiled and changes from a liquid into a vapor or steam?

what's the Navy's preferred fuel oil for shipboard plants?

what contains all required procedures for the fuel system´s safe operation?

what is the purpose of the gas turbine engine GTE

how many primary paws are mounted on the clutch output assembly?

what is the maximum fill level of the fuel storage tanks during replenishment at sea?

isused overboard spills and contains sorbent sweeps that are positioned over the side to absorb oil on the water surface

the auxiliary propulsion system APS is capable of providing a ship speed of approximately how many knots KT

what document has the status update of all fuel and water supplies onboard?

what type of turbine does steam enter at the center, divides and flows outward through two identical sets of stages?

what component of the steam turbine accepts the force of the steam and turn it into rotational motion?

what component mixes the fuel and air for efficient combustion?

what valve allows fuel to be routed to the purifier without being heated if temperatures are already high enough?

what does the status indicator assembly tell about the clutch?

how is a zone inspection planned and scheduled?

what is used to motor the gas turbine generator GTG for maintenance purposes such as water washing?

system removes accumulated water and sediment from the bottoms of fuel tanks and from the service system suction piping.

what stops the flow of fuel in an emergency?

who ensures confined spaces no longer contain dangerous levels of toxins and are safe for entry?

what term is used for the lowest temperature at which the fuel will ignite in air without a spark or flame?

how many strokes does a piston make in a four-stroke diesel engine?

when the piston is at the bottom of the stroke it is said to be at what position?

what component supports the engine´s cylinder liners, cylinder head and crankshaft?

what stroke is a full charge of air draw into the cylinder of a four-stroke diesel engine?

component of the SSS cushions the final movement of the main sliding assembly when the main clutch teeth approach full

what is the minimum flashpoint for F-76 and JP-5 fuel?

what is the simplest and most common type of steam turbine?

what stroke is fuel injected into the cylinder in a four-stroke diesel engine?

what automatically engages and disengages the gas turbine engine GTE to and from the main reduction gear MRG

what is the rating of the fuel oil self-cleaning purifier?

what term identifies the sequence of combustion event that take place in the cylinder of the engine?

what component uses the heat from the boiler exhaust gases to preheat the feed water as it reenters?

what test detects whether any unintended valves are open which would allow fuel to accumulate in the wrong place

when should fuel-soaked clothing be washed or clean?

what kind of elements are in a straight-through turbine unit?

how does a work center WC store hazardous material HAZMAT

what contamination range can the free water detector reliable detect?

how do spray shield's function ?

how many combustion avents are the in diesel engines?

what is a rigorous periodic examination of a particular area?

which of the following is a gauge measuring tape on a reel with a swivel snap and brass plumb bob?

what transfer power and rotation from the GTEs or APMs to the propeller?

what is attached to the crankshaft that stabilizes the crankshaft's rotation ?

what permits local operational control of the auxiliary propulsion system APS

what is standardized document that list all (pertinent) general information for a given material

how many compressor stages are on gas turbine engine GTE compressor?

what anchor the blades and transmit their force to the shaft?

what is the purpose of the expansion tank?

what changes color when it comes in contact to water to let you know the depth of water in the tank?

what section of the LM2500 does combustion take place?

where are steam safety valves installed on boilers, other than on the super heater?