The half-circle is most often used to move the hair…

half-toward, half-away from the face

Which of the following is necessary before the hair deign procedure begins?

clean and disinfect workstation

When pressing the hair, partings are taken according to the…

density and texture of the hair

In hair design, defining the form includes smoothing the surface of the hair and…

controlling the amount of desired volume

Which of the following is a guideline to follow when distributing and molding for a hair design…

monitor temperature of heat while air forming

Which guideline is performed prior to the hair design service?

check scalp for any diseases or disorders

studbud

Hair Design 107

100 termsStudBud Administration8 plays

Imported from external platform

Flashcards100 cardsFPractice quizPHost liveL

Questions 100

Answers

1
Which of the following tools positions is not used in curvature volume?
overdirected
underdirected
on base
off base
2
The half-circle is most often used to move the hair…
half-toward, half-away from the face
in one direction
in alternating directions
toward the face
3
What product prepares and protects the hair from heat styling and also conditions and adds shine?
clay
putty
thermal protectant
spray gel
4
The art of shaping and defining the hair in graceful waves is known as…
wet sitting
pincurl sets
fingerwaving
shadow waving
5
Which of the following is true about the use of a smaller round brush when air forming?
used for longer hair
creates smoother results
creates a very loose curl
results in curlier style
6
In hair design, curvature shapes or sections include the circle, oval, and…
rectangular
oblong
triangular
square
7
Which of the following is necessary before the hair deign procedure begins?
complete client record
clean and disinfect workstation
ask client to thank you for service
scale the hair into straight and curvature shapes
8
Who was the first person to introduce thermal irons?
Henry Ford
Benjamin Franklin
Marcel Grateau
Thomas Edison
9
When performing thermal setting procedures, allow hair to cool before…
applying the appropriate tool
applying finishing techniques
applying setting techniques
analyzing the scalp
10
Which of the following results would be achieved by using a pincurl with a closed circle?
smaller and stronger wave
uniform effect
wider wave
weak wave pattern
11
The place where motion begins is known as…
parallel
molding
radial
point of origin
12
Crimping iron create which type of texture?
undulating
soft
spiral
angular
13
What type of pattern does an undulating iron produce?
S-shaped
O-shaped
C-shaped
figure eight
14
Two or more alternating oblongs create a(n)…
figure eight
O-shape
S-shape
C-shape
15
Which diameter size means the area between partings is exactly the same as the diameter of the roller?
2 1/2x
1x
2x
1 1/2x
16
Which type of pincurl is used to create follow space or flare?
volume
skip waves
indentation
flat
17
When pressing the hair, partings are taken according to the…
diameter of the tool
base control desired
elasticity of the hair
density and texture of the hair
18
An area of hollowness between areas of volume is called…
stem
ridge
base
indentation
19
A form of finger styling that involves squeezing the hair to introduce a texture pattern the hair naturally responds to…
thermal ironing
scrunching
hair pressing
backcombing
20
Which of the following shapes is used to move the hair in equal proportions from a center point of origin?
half-oval
triangle
oblong
half-circle
21
The tool used to relax a set, backbrush or smooth the surface of the hair is referred to as a…
round brush
cushion brush
vent brush
9-row brush
22
Distribution is classified as either parallel or…
spiral
upward
downward
radial
23
What type of pincurl is used to achieve a blend or transition from areas of volume to areas of closeness?
carved
indentation
semi-stand-up
flat
24
Flat irons consist of two flat plates that include ceramic or…
nylon
wood
plastic
metal
25
The blow dryer attachment that focuses the airflow to a small area is called the…
concentrator
nozzle
handle
diffuser
26
Which of the following is generally not a reason to receive a hair design service?
weekly service
special occasion
completion of another service received
hide color mistakes
27
Three common curvature pincurls are flat, volume, and…
indentation
cascade
barrel
stand-up
28
Name the part of the thermal iron indicated by number 1
rod handle
groove shell
shell handle
barrel/rod
29
Which styling product creates maximum control and support of the hair especially for wet setting?
gel
hairspray
pomade
styling lotion
30
During hair pressing, fine hair requires which of the following actions?
apply less heat
apply more heat
apply hard press
apply a double press
31
The second direction, or bottom half of the oblong shape moves toward the…
closed end
concave end
back end
convex end
32
The area of hair designing where hair is manipulated into desired shapes and movements while wet then dries is…
thermal design
directional design
wet design
form design
33
Which of the following means to carve out shapes in the proper size and proportion to establish the lines of the design?
mold
scale
distribute
part
34
To reduce the potential of hair and scalp damage from heat, hold the blow dryer at least…
18” to 20” from the hair
8” to 10” from the hair
3” to 5” from the hair
12” to 15” from the hair
35
Overdirection of the wave in fingerwaving may be caused by…
use of styling lotion
rolling your fingers off the ridge
pinching or pushing the ridge
forming the ridge at the concave end
36
The blow dryer attachment that fits on the nozzle and allows control of air flow to a small area is called…
air flow control
concentrator
temperature control
diffuser
37
Which type of set allows you to position rollers diagonally and set from multiple points of origin?
half-oval
oblong
half-circle
expanded circle
38
A skip wave is a combination of flat pin curls and…
volume waves
barrel waves
transitional waves
finger waves
39
In hair design, defining the form includes smoothing the surface of the hair and…
backcombing the hair
blending the hair between the partings
controlling the amount of desired volume
piercing or pleating the hair
40
Flat pincurls begin at which end of the oblong or shaping?
convex
first
second
concave
41
Tighter curl pattern added to increase-layered forms crate the illusion of…
shorter lengths
longer lengths
geometric shapes
weight
42
The type of comb that is used to separate curls and define texture is called…
wide-tooth tail comb
fine-tooth tail comb
shampoo comb
molding comb
43
When performing an air forming services, if the client wants volume, where should the round brush be positioned?
on top of the hair
curled out from ends and up
on top of the ends
underneath the hairstrand
44
Which of the following is a guideline to follow when distributing and molding for a hair design…
protect client’s scalp from thermal irons
choose appropriate base controls
avoid pulling the hair
monitor temperature of heat while air forming
45
Which guideline is performed prior to the hair design service?
complete client record
ask client to purchase products
schedule client’s next appointment
check scalp for any diseases or disorders
46
What is the area between straight and curved partings within a shapes or section where the tool is placed called?
base
arc
circle
stem
47
The type of comb that is sued for distribution, molding, scaling, and parting the hair is called…
teaser comb
master sketcher
fine-tooth tail comb
wide-tooth tail comb
48
What determines the size of the circle of a curl?
tool length
stem diameter
tool diameter
base diameter
49
When the tool sits in the lower portion of the base, but not on or below the parting, which tool position is used?
off base
half-off base (half base)
underdirected
on base (full base)
50
Which of the following techniques is used to set and expanded circle?
direct
inner-to-outer
narrow-to-wider
indirect
51
Which product is used to prepare and protect the hair during pressing to prevent scorching and breakage?
gel
pressing cream
aerosol hairspray
mousse
52
Name the part of the thermal iron indicated by number 4
barrel/rod
groove shell
shell handle
rod handle
53
During which of the following service essentials do you personalize the hair design to add your personal touch?
complete
connect
consult
create
54
Which of the following shaped base is used within a half-circle?
rhomboid
triangle
circle
trapezoid
55
Name the part of the thermal iron indicated by number 2
barrel/rod
rod handle
groove shell
shell handle
56
The size of the curl will be determined by the…
length of the stem
direction of the curl
diameter of the tool
size of the base
57
Always feed the ends of the hair all the way through the curling iron to avoid crimped or…
fishhook ends
split ends
expanded volume effect
indentation ends
58
Which of the following tool positions will result in the least volume and the least base strength?
off base
underdirected
half-off base
on base
59
The combination of base size in relation to diameter of the tool and tool position in relation to the base is called…
base control
combination control
diameter control
curl control
60
The technique used to create a curved-under or flipped-up effect by adding curl texture to end only is called …
curl technique
end technique
roll technique
undulating technique
61
The form of hair design is the result of volume and…
fullness
wet designing
air forming
indentation
62
In hair design, straight shapes or sections include the triangle, trapezoid, and…
rectangle
circle
oblong
oval
63
All single-use items must be…
cleaned after each use
discarded after each use
washed in washing machine
disinfected after each use
64
Another name for hair pressing is…
silking
ironing
scrunching
air forming
65
Which of the following is necessary during the hair design procedure?
wash hands and liquid soap
distribute hair in desired directions
ask client to thank you for service
analyze hair and scalp
66
The shape that is set with rhomboid-shaped bases is known as a(n)…
half-circle
half-oval
oblong
expanded circle
67
The off-base (full stem) pincurl produces which of the following results?
closeness and mobility
lift or strong curl
reduced volume
direction and volume
68
The brush that allows the greatest airflow so hair can be dried quickly while directing into lines of the design is…
vent brush
round brush
cushion brush
9-row air-forming brush
69
Depending on hair length, which curling technique creates stronger curls at the ends and weaker at the base?
ends only technique
ends-to-base technique
base only technique
marcel technique
70
Hair design is a temporary change in…
form, texture, and direction
indentation
form, texture, and color
volume
71
Which bonds in the hair are weakened or broken by water or thermal heat?
hydrogen bonds
oxygen bonds
sulfur bonds
disulfide bonds
72
What is used to keep the base flat while curving the stem with a comb when forming an indentation pincurl?
tail of the comb
spine of the comb
little finger
index finger
73
Pressing the hair twice with more pressure and heat during a hair pressing service is referred to as a…
curl press
hard press
soft press
stove press
74
What type of pincurl is used to create fullness and height?
semi-stand-up
flat
volume
indentation
75
Which distribution refers to straight/curved lines originating from a point of origin and radiate out like wheel spokes?
curved parallel
parallel
radial
straight
76
Which of the following is a guideline to follow prior to the hair design service?
ask client to purchase products
check scalp for any diseases or disorders
schedule client’s next appointment
complete client record
77
The five finishing procedures include release, dry mold, backcomb/backbrush, define the form, and…
detail
style
hairspray
comb
78
The two areas of hair design services are…
weekly service and special occasion
wet design and thermal design
straight and curly hair designing
roller setting and air forming
79
What is created by molding two complete alternating oblongs (shapings) that are joined and connected by a ridge?
pincurl
fingerwave
skip wave
flat pincurl
80
In which direction should a blow dryer’s airflow be pointed?
down the hairstrand from the scalp to the ends
back and forth across the hairstrand
up the hairstrand from the ends to the scalp
up and down the hairstrand
81
Which of the following is necessary after you have completed the hair design procedure?
check for overall balance
insist client purchase products
add finishing touches
disinfect multi-use supplies
82
Which of the following steps would be used when performing the spiral technique with a thermal iron?
placing hair between 2 crimped plates
positioning the curling iron vertically at the base
placing hair between 2 flat plates
positioning the iron horizontally at the base
83
The hair type that requires lower temperature and less contact time when using electric iron in which of the following…
resistant hair
red hair
chemically altered
healthy hair
84
In hair design, the diameter of the tool being used determines the…
base control
base length
base shape
base width
85
Holding hair 90° from center of base with tool sitting half-off / half-on bottom parting results from what base control?
overdirected (volume base)
underdirected
half-off base (half base)
on base (full base)
86
The 2nd direction, or bottom half of the oblong shape moves toward the…
convex end
back end
closed end
concave end
87
What type of hair can be quite resistant to hair pressing?
medium
thin
coarse, tightly curled
fine
88
An on-base tool position will result in the strongest base strength and…
least strength
smallest diameter
maximum volume
least volume
89
Which base control positions the tool completely off the bottom parting?
off base
on base (full base)
overdirected (volume base)
half-off base (half base)
90
Before brushing or combing the hair after a thermal procedure, make sure the hair is…
moist
warm
shampooed
cool
91
Which of the following can be used to remove buildup from a cool iron barrel?
a damp cloth
a toothbrush
soap and water
spray cleaner
92
Begin at the concave end and create a curved parting in the second direction when parting and applying…
rollers within an oblong
flat pincurls
volume pincurls
fingerwaves
93
Which of the following hairstyling products creates sleek, smooth finishes?
gel
pomade
styling lotion
underdirected
94
In which hair design techniques is a small hair section held taut in one hand, whole the other slides brush ends to base
scrunching
relaxing the set
detailing
backbrushing
95
The following illustration exemplifies which type of distribution?
parallel
expanded
radial
circular
96
A tool that is effective for smoothing wavy or curly textures, adding directional emphasis when air forming is called…
fine-tooth comb
vent brush
cushion brush
7- or 9-row air forming brush
97
Using a hand-held dryer while simultaneously using the fingers to style the hair is an example of…
thermal designing
form designing
directional designing
wet designing
98
In order to retain heat, curling irons barrels are made of which of the following materials?
stainless steel
bronze
copper
heavy plastic
99
Rain, humidity, and shampooing will cause thermally styled hair to react in which of the following ways?
curls lighten
hair becomes lustrous
hair returns to its original shape
curl press
100
Which base control is used to create reduced volume and base strength?
overdirected
underdirected
on base (no stem)
half-off base (half-stem)

Hair Design 107 Flashcards | StudBud