Intro Class Review

When bending down to lift something you should ?

Sara says that you only need an SDS after an accident occurs

Billy says that the inline engines are generally easier to work on than V engines

Tech B says that major repairs are needed more frequently on newer engines

All of the following statements are true except:

Acid spills can be cleaned up using:

Thor says that brake pedal pressure is transmitted to the brakes hydraulically

Which Style of torque wrench is the simplest and least expensive?

Mark says that as long as you replace at least one part on a vehicle with a problem, verification is unnecessary?

What does the 10th character of a North American VIN denote?

Tesla was named after Nikola Tesla

Herman says that the length of the bolt is measured from the top of the head to the bottom of the bolt.

Tech A Says that you should always wear ear protection when using an air hammer.

King Henry says that anti seize compound is type of thread locking compound.

Which of these components multiplies the torque from the engine by running it through a number of different gear ratios

A bolt has 3 hash marks on its head. What is its grade

Vehicle security PIN codes can typically found in the ?

Tech A says that hoists should be inspected and certified periodically.

William Wallace says They may take away our lives, but they'll never take our freedom!

When compared to early vehicles, modern vehicles do not have: 

When disposing of used liquids :

Cody says that "Caution" is one of the three C's

Tech A says that a technician can progress to different jobs within the industry.

Alex says that the one advantage of a mid-engine design is better weight distribution

Tech A says that newer vehicles require less maintenance compared to older vehicles

Clitorisandrea says that you should always wear holey skinny jeans in the shop?

Jackie Brown says that pushing on the brake pedal stops the vehicle by converting chemical energy into thermal energy

Carlos Says that a safety data sheet (SDS) contains information on procedures to repair a vehicle

Tech B says that standard wall sockets can be safely used with impact wrenches.

Tech Eh says that the diameter of a bolt is measure across the flat of the head

 Tech A says that AYES certifies technicians.

Which of these is true of a air impact wrench?

The advantages of using rose bud tips are?

Which nut is made with a deformed top head

Which of the following works toward finding the most effective ways to help prevent worker fatalities and work injuries

Sponge Bob says that chemical energy is converted to mechanical energy by the combustion process of the engine

Oil filters should be installed using ?

Which of the following is true?

Which of these are threaded fasteners?

Easiest way to identify the TPI is ?

The first step in the Strategy-based diagnostic is to

All of the following statements are correct except:

Jack says that exposure to solvents may have long term affects

Which of these is true of a spray wash cabinet?

Steve says that a common method for repairing damaged internal threads is a thread insert

Shaniqua says rings, watches and other jewelry should be removed prior to working

Tech B says that safety locks do not need to be applied before working under the vehicle.

Dylawn says that you should put tools away when done using them

Franklin says that gasoline is energy in chemical form

Shaina says that the purpose of the battery is to charge the vehicle

Sally says that tag-out is used when a tool is no longer fit for use and identifies what is wrong with it?

Johnathan says that exposure to solvents may have a long term effect

In case of an open fracture you may do all of the following except ?

Shawn says when cleaning brake and clutch components, the wash station should be placed directly under the component?

Which of these should never be used to remove dust

Zack says that reviewing service history in an important part of diagnosis ?

Hairy says that a feeler gauge is used to measure the diameter of small holes.

Jeff says that the micrometer spindle should be firmly closed against the anvil prior to storage.

Which of these wrenches can be awkward to use once the nut or bolt has been loosened a bit?

Timmy says that lockout is designed to secure a vehicle after all work on it is completed

All of the following are good practices when operating a hydraulic press expect

Airwrecka says that PPE used should be based on the task you are preforming

Which of these should not be used in a shop?

Cassandra says that a thread file is used to repair the threads on the inside of a bolt hole

Tech A says that it is a good practice to perform a walk-around inspection of the vehicle with the customer. 

The list of steps required to get the same result each time a task or activity is performed is known as the ?

What was the Original Color of the Model T

Jerry says that personal protective equipment (PPE) does not include clothing

In an 8mm bolt, 8mm refers to the :

Which of these isn't a good choice as a cleaning agent for brake components

Four-post hoists are most often used for:

You can use a disposable dust mask to protect yourself from

Athena says that the rear engine design commonly used in Four wheel drive vehicles

Bella says that TSB's are typically updates to the owners manuals?

Michael says that a piston engine has a roughly triangle shaped rotor

When soldering non-electrical connections, What should be used as the flux-cleaning agent?

Which of the following is not one of the three C's of vehicle repair?

Which piece of equipment is typically used to jack a vehicle one wheel at a time?

John says that when using a micrometer, a "standard" is used to hold the part you are measuring.

What should you do When grinding metal using a bench grinder?

Juan says that a feeler gauge and straight edge are used to check surfaces for warpage.

Tech B says that you should never exceed the lifting capacity of the hoist.

All the statements below with respect to emergency evacuation are true expect?

Tech B says that having ASE certifications can make it easier to get a job

What word that indicates a potentially hazard situation which if not avoided could result in death or serious injury?

All statements are true except: 

All of the following may pose a problem when working on rotating equipment expect?

Neoprene gloves are idea for protection from?

Which of the following organizations certify technicians in all areas of a vehicle? 

Nate says that PASS is an acronym used to help remember how to use a fire extinguisher

Your MOM says that TSb's are generally updated information on model changes that do not effect the technician

Rebekah says that accidents are almost always avoidable

When multiple pieces of lifting equipment are used, the SWL is:

Which of these is used for driving and cutting ?

When a large chisel needs a really large strong blow, use a:

Advances in vehicle manufacturing technology have decreased the need for:

Queen Elizabeth says that thread-locking compound act like very strong glue.

Jeremiah says that the cause of the customer concern should be recorded on the repair order.

A design that either partially or wholly integrates the body-work into a single unit with the chassis is called ?

 Tech B says that careers in the automotive industry includes parts manager.