Engineering Design II Final Review

To develop and produce a product or system, one can use the :

Which is considered to be an energy source?

Fully automatic systems:

What is a benefit of having feedback in a system?

A microphone without a speaker is an example of what type of loop system?

What provides information in a complex system?

What determines whether the proposed solution is appropriate for the problem?

Complex systems usually have components that detect, back-up, bypass, or compensate for:

If engineer is asked to design a non-intelligent transportation system, 1 design characteristic

Type of modeling to determine how much fuel is needed to run a new model car Chevy is creating

The design process is able to yield design solutions because it is:

Stability of a technological system is influenced by components in the system, esp. those in

What is an advantage of using prefabricated materials in the construction of structures?

What involves trade-offs between competing values, like availability, cost, desirability,&waste

The firearms industry was revolutionized through the introduction of:

This ensures that a product meets the highest standards and is ready to be sold:

A prototype is used to test a design concept by making actual:

Complex systems such as the filtration system in a very large aquarium fish tank rely on:

Which 3 components of a design compete with each other?

In the Apollo 13 space mission, what was necessary for astronauts' successful return to Earth?

Which would ergonomic design NOT resolve?

What are the four components of a closed-loop program?

Power systems must have an energy source, process, and :

After one tests a prototype, what should be done if it does NOT perform as needed?

Some design solutions should NOT be developed based on design:

Which energy source would be the BEST choice for limiting heating and cooling costs for a home?

Mathematical models of a design are used to:

In order to navigate the Mars Rover, which electronic navigation system must be used?

A small display-table-sized replica of a building to demonstrate the design is called:

An example of a nondurable good is:

The limited amount of money available to spend in an effort to solve a problem is an example of

Criteria and constraints:

Design is a __________process

Which would be an example of wise water use for gardens on farmlands?

A design challenge is defined by identifying:

Using hollow tubing to construct a bridge in a builder simulation software, what is achieved?

What is the main reason Absestos is no longer used in home insulation?

A description of the materials available for the design of a project is a good example of:

Within the design process, what step must be taken before one enters the brainstorming stage?

Advancements in traveling such as the GPS device are known as:

Upgrading a BMW with thermal imaging developed by the military is an example of:

While a systems model places it at certain point, what can occur at any stage in the approach?

A human body converts food energy to motive power through the process of:

The first step in the design process is to:

A fully automatic blood pressure system cannot function without energy from:

Developing and producing products using a design process applies only to:

Information about the past or present system outputs that influences present or future systems:

Feedback loops and multiple layers in one system is an example of a/an:

The first step in the prefabrication process of building a home:

What is the purpose of a patent?

When a new part can be used to replace a damaged part, that feature is known as:

The protection of a creative idea to safeguard the inventor's invention and give credit to her

What type of energy resources can be replaced with the passage of time?

The speed governor on a golf cart is an example of a

What are limits related to the design of a technology system?

An underwater tunnel w/electronic signs warning of traffic&delays is what type transportation?

Why are patents important in the development of additional products?

Systems thinking requires which 3 skills?

Who clarifies ideas when asked &uses words, sketches,&models to communicate details of projects

Another word for prototype is

The part of a system that gives information concerning the operation of the system is known as:

Once Jane has completed the design of a new hammer meeting all the requirements, the next step:

How technologists gather relevant material to produce evidence for a portfolio:

Which is a downside of technology?

While Tang was 1st created for astronauts it was later mass produced for all.This is example of

Which example may involve trade-offs

AFTER a written design proposal and BEFORE testing the solution, what step must be taken?

Stephen needs to build a pen to hold his sick bull. Which is MOST LIKELY his first step?

Which part of a system indicates whether something is malfunctioning?

Criteria are:

Using a hammer to drive a nail into a piece of wood represents what kind of energy?

Constraints are described as "needs" and criteria are described as:

What significant concept was popularized by Eli Whitney with the assembly of muskets in 1800s

Using aerospace composite materials to design advanced light-weight wheelchairs is example of:

In what form are design problems typically presented?

Building a manufacturing plant on prime farmland is an example of a:

Limiting the size of an oil tanker based on cost is an example of a/an:

When designers are deciding on materials and the cost, they are making:

An example of a societal demand that may influence the development of a new technology is:

What is NOT a step in the design process?

What must be formed when designs are being developed?

The height limit for a building downtown is 2,500'. This limit is a building and design:

Which technological advancement could clean exhaust gases from a coal-fired steam power plant?

A computer mouse communicating to a computer monitor is an example of what kind of loop system?

Which is not a guidance subsystem for a vehicle?

What is the purpose of the design for a durable good?

To determine whether a tech product satisfies the design goals, these 4 criteria must be met:

Which has the MOST influence within a technological system?

More knowledge or competing technologies cause a design to:

Transportation is:

What are necessary components of the testing and evaluating step of the design process?

Using the systems approach, whispering something into another person's ear is an example of:

Which is example of innovative technology implemented into intelligent transportation systems

What inspires the creation of MOST technological devices?

What must be identified to optimize a design and determine the final product design?

Which is an example of a load in an electrical circuit?

An example of a device that uses a feedback loop is:

What might be necessary at some point in a complex system?

Assembly lines are a form of:

An example of non-intelligent transportation system is:

The purpose of a patent is to:

Many systems are often parts of

Materials, tools, machines, people, information, energy, capital, and time are:

The stability of a system can be improved with appropriate:

Which is an example of technology transfer?

Conflicting solutions to design problems are usually caused by:

The designed world is a product of:

Mary Anderson invented which product to improve navigation in bad weather?

During the design process, design decisions typically involve types of issues that conflict

The final step in a standard closed-loop problem-solving process is to:

When engineers generate, build, and combine concepts in new and flexible ways, it is called:

During the design process, constraints must be identified and:

Another word for technology transfer is

Defining a problem and generating ideas are part of which process?

___occurs when a new user applies existing innovation developed for 1 purpose in new function?

Which progression is an example of technology transfer?

What is the FIRST step to begin the transfer of technology when producing a product?

An appropriate input in the making of a chair would be:

Engineering innovation addresses societies':

_____resources are another form of renewable resources.

In preparation for building a specific tourist shuttle, the engineer developed a :

People seek patents for the purpose of

Engineering design is influenced by personal characteristics, such as:

The part of design typically involves individual, economic, social, ethical and political issue

Technological innovation is the result of:

Since every problem is unique, engineers and designers approach the design process:

Designing a baby crib to meet safety regulations & to be aesthetically pleasing is example of

What does a prototype enable one to do?

A farmer caring for 100 acres of crops can engineer an irrigation system by:

Before an item can be manufactured, a ____must be created to test effectiveness of design

The steps of the design process are performed in:

Models are used to:

The development of microwave technology led to the creation of which new process?

Engineering design does NOT include:

What design elements are used to determine which product model meets a design challenge?