stud
bud
Sign up
Log in
Home
Library
Explore
SAT
More
FARs 2 Flashcards | StudBud
Explore
/
FARs 2
FARs 2
58 terms
·
StudBud Administration
·
86 plays
1 of 2
Flashcards
58 cards
F
Practice quiz
P
Host live
L
Questions
58
Answers
1
What is the duration of a temporary airman's certificate?
120 days
30 days
90 days
60 days
2
The 100 hour inspection required by FAR for aircraft operating for hire may be performed by:
A repairman at a repair station
A private pilot
Appropriately rated mechanics and approved by them for RTS
An A&P with an IA
3
For Part 91 aircraft, what records must be retained and transferred when they are sold?
Records of 100 hr, annual and progressive inspections
All maintenance records
Current status of ADs and due dates of recurring ADs
Records of inspections performed IAW Part 43, Appendix D
4
Why are Airworthiness Directives (AD) issued?
To give temporary maintenance procedures
To prescribe a certificated mechanics privileges and limitations
To correct an unsafe condition that exists in an aircraft or component
To notify maintenance of when to ground an airplane
5
Where should the 100 hour inspection be recorded?
Form 337 and letter to aircraft owner
Form 8010 and letter to aircraft owner
maintenance record and letter to aircraft owner
In appropriate maintenance record for inspected component or appliance
6
What is the duration of a mechanic's certificate
only valid until mechanic leaves industry
Certificate is valid until surrendered, suspended or revoked
every 5 years unless recertified
Certificate will never expire
7
What is the penalty for making a false entry in an aircraft, engine or propeller logbook?
Fine not less than $1,000
Only suspension of any Airmen Certificate(s)
Suspension or revocation of any Airmen Certificate(s)
Fine of not more than $1,000
8
A maintenance record is always required after maintenance, preventive maintenance, rebuilding or alteration
False
True
9
What are the requirements of recent experience in order to exercise the privilege of your mechanics certificate?
worked or supervised as a mechanic 6 months out of the past 24 months
worked or supervised as a mechanic 12 months out of the past 48 months
worked or supervised as a mechanic 12 months out of the past 36 months
worked or supervised as a mechanic 6 months out of the past 12 months
10
What FAR prescribes the requirements for issuance of a type certificate?
FAR Part 121
FAR Part 43
FAR Part 25
FAR Part 21
11
What authorizes a certified mechanic who holds an Inspection Authorization to approve a major repair or alteration?
FAR 65.95
FAR 43 Appendix D
FAR 43.11
FAR 43.9
12
Certified mechanics with a powerplant rating may perform:
100 hour inspections of engine and cannot RTS
100 hour inspections of the entire airplane but cannot RTS
100 hour inspections of engine and may RTS
100 hour inspections of the airframe but cannot RTS
13
When can a person holding a Private Pilot Certificate perform preventive maintenance?
The aircraft is owned and operated by that pilot & is not used for hire
When there are no certified mechanics
Never
The aircraft is owned &operated by that pilot & used for hire under FAR 121
14
What is the name of the manual that the manufacturer provides to technicians who normally perform work on the aircraft?
PMA
Service Bulletin
Illustrated Parts Catalog
Aircraft Maintenance Manual
15
Under what conditions may the aircraft be flown if it has a defect that makes it unairworthy?
only with a test pilot
only with an instructor pilot
with a special permit to get to the maintenance facility
It cannot be flown
16
How often are Airworthiness Directives (AD) issued?
bi-weekly
monthly
weekly
quarterly
17
Where are major alterations, major repairs, and preventive maintenance defined?
FAR Part 91
FAR Part 43 Appendix A
FAR Part 43 Appendix D
AC 43.13-1B
18
What part of the FARs describes the airworthiness standards for Transport Category airplanes?
FAR Part 43
FAR Part 121
FAR Part 21
FAR Part 25
19
In what publication may a mechanic find an example of a maintenance record entry for a 100 hour inspection?
FAR Part 43.9
FAR Part 43 Appendix D
FAR Part 43 Appendix A
FAR Part 43.11
20
What action is required when a minor repair is performed on an aircraft?
FAA Form 337
Entry in the maintenance logbook
Entry in the maintenance logbook by an IA only
Entry in maintenance logbook and Form 337
21
How are AD updates issued to subscribers to the Summary of Airworthiness Directives?
bi-weekly supplements
quarterly supplements
annual supplements
weekly supplements
22
How long are AD compliance records required to be kept?
Until the AD is complied with
Retained and transferred with the aircraft when its sold
Until the work is repeated or superseded by other work
1 year after AD is complied with
23
How can you determine if the repair of damage is a major or minor repair?
FAR Part 43, Appendix A
FAR Part 43, Appendix D
FAR Part 91, Appendix B
AC 43.13-1B
24
Primary responsibility for compliance with airworthiness directives lies with __
The inspector doing the annual
the FAA
aircraft owner or operator
The A & P
25
Mechanics with an Airframe rating can perform minor repairs to an airspeed indicator
True
False
26
A FAA Form 337 must be filled when:
Major repair has been made
100 hour inspection has been completed
Minor repair has been made
STC has been complied with
27
What maintenance record entries are required to contain the aircraft total time in service?
only records of inspections
all records of any maintenance
no record of aircraft time in service is required
only for airworthiness directive compliance
28
What is preventive maintenance?
preservation and replacement of all parts in the aircraft as needed
all repairs that aren't part of airworthiness directives
replacement of small parts NOT involving complex assembly
replacement of small parts including complex assembly
29
May a mechanic supervise an inspection and then approve the aircraft for return to service?
No
Yes
30
A certified mechanic with Airframe & Powerplant rating is authorized to approve for return to service an aircraft after:
Progressive inspection
Annual inspection
Any airframe or powerplant major repairs
100 hour inspection
31
What is the primary intent of the ATA code?
Provide standardized organization of technical data
Provides a catalog of all Advisory Circulars
The standardized organization of information for 14 CFR
Provide standardized maintenance procedures
32
Who may approve an aircraft for return to service after a 100 hour inspection?
A certified mechanic with an Airframe and Powerplant rating
The aircraft manufacturer
A repair station's certified repairman
A mechanic holding an Inspection Authorization (IA)
33
A person working under the supervision of a certified mechanic may NOT perform which of the following procedures?
100 hour inspection
Removal and replacement of an engine
Repair of a wing structure
Adjustment of aileron wing cable turnbuckle
34
When are Inspection Authorizations renewed?
1 year after certification
2 years after certification
before March 31st of every other year
within 30 days of the new calendar year
35
Is a certified Airframe mechanic allowed to perform maintenance on engines?
No
Yes
36
Can you address the unsafe condition in a way other than the Airworthiness Directive says to?
Yes
No
37
Can a certified powerplant mechanic make a minor repair on an aluminum propeller?
No
Yes
38
What is the difference between an annual and a 100 hour inspection?
100 hour is only half of an annual
No difference
Annual is a more complete inspection
No difference, but an annual can only be performed by an IA
39
What are the privileges for an A&P mechanic regarding inspection?
May perform and approve RTS for 100 hour inspection
May perform and approve RTS for annual hour inspection
May perform 100 hour inspection, but cannot RTS
May perform annual inspection, but cannot RTS
40
Under what circumstances is compliance with a manufacturer's service bulletin mandatory?
it is issued with a mandatory status
it comes from the manufacturer directly
it is part of the airworthiness directive
it is marked Urgent Alert
41
If an annual inspection was signed off on April 7, 2012, what is the date of the next annual inspection?
April 30, 2013
April 7, 2013
March 31st of the next year
April 6, 2013
42
What is Type Certificate Data Sheet?
Contains info needed for maintenance of an aircraft
A reference for ordering parts
Applies to several models of aircraft
Is not intended for use with maintenance
43
When may a mechanic perform an annual inspection and return the aircraft to service?
It is an annual inspection of a plane less than 12,500 pounds
The A&P holds an Inspection Authorization
A&P may never perform an annual
The A&P works at a repair station
44
Who issues service bulletins?
US Department of Transport
NTSB
Manufacturer of Product/ Part
FAA
45
How does the FAA notify aircraft owners of unsafe conditions that must be corrected?
issuing airworthiness directives
issuing service bulletins
issuing malfunction/ defect reports
issuing advisory circulars
46
If a defect is found which makes it unairworthy, the person disapproving must __
void the aircraft's airworthiness certificate
submit a malfunction or defect report
provide a written notice of the defect to the owner
provide a written notice of the defect to the owner and the FAA
47
What are the limitations to a mechanic's privileges with regard to propellers?
Mech cannot supervise major repairs or alterations
Mech can supervise and perform major repairs
Mech may not perform or supervise major repairs or alterations
There are no limitations of a mech's privileges
48
What are the penalties for making fraudulent or intentionally false entries in any required record or report?
All certificates revoked and mechanics name placed on nation "blacklist"
Applicable certificates can be suspended or revoked
Possible suspension
Depends on the severity of the fault performed
49
An AD requiring compliance multiple times is called:
Recurring AD
One time AD
Multiple AD
None are correct
50
Anyone performing a Annual or 100 hour inspection will use a checklist that contains items listed in Appendix D of what?
FAR 39
FAR 21
FAR 43
FAR 65
51
What information can be found on the Type Certificate Data Sheets?
Datum
TSO
Wheel instillation
PMA
52
Where in the FARs will you find the certification requirements for mechanics?
FAR Part 65
FAR Part 25
FAR Part 43
FAR Part 91
53
For what period of time must an aircraft owner maintain the records of a 100 inspection?
until work is superseded or for 2 year after inspection
until work is superseded or for 1 year after inspection
100 hours after inspection
until work is superseded only
54
What publication should a mechanic consult to determine if a repair is considered major or minor?
FAR Part 43.11
FAR Part 43.9
FAR Part 43, Appendix D
FAR Part 43, Appendix A
55
What is the requirement for displaying a Mechanic Certificate?
Kept on file at your place of employment
Prominently displayed in the work area
Must be kept on person at all times
Kept in the work area when the technician is exercising mechanic privileges
56
Which of the following publications is NOT issued by the FAA?
Type Certificate Data Sheet (TCDS)
Structural Repair Manual (SRM)
Airworthiness Directives
Advisory Circulars (AC)
57
What are the rating issued under a mechanics certificate?
Airframe and powerplant
Airframe and instruments
Airframe and engines
Airplane and propeller
58
Maintenance record requirements for recording 100 hour inspection is found in Part 43 paragraph:
43.9
43 Appendix A
43.11
Appendix F
