When starting the planer, what height do you need to set the machine?

The Thickness of the board - 1/16

When can I use my phone in Wood shop?

When the sign is on green, not in the shop

Before leaving the band saw, what THREE things need to happen?

Turn Machine off, wait for blade to stop, lower guard

When should you have Safety glasses on in the wood shop?

All the time anywhere in the Work shop

If your Board gets stuck going through the planer what should you do?

wiggle it, push it, stop the machine, lower the table

What two things should you do to prevent from drilling into press table?

Set the depth stop, use scrap wood below

When using the drill press:

Slowly cut into material to not cause tear out

studbud

Wood Shop Quiz

80 termsStudBud Administration542 plays

Imported from external platform

Flashcards80 cardsFPractice quizPHost liveL

Questions 80

Answers

1
What is the main reason for a kick back on the table saw?
Operator Error
Not tight to the fence
lifting up the board
crosscutting
2
What should you adjust the guard to, when using the band saw?
Make sure material is tight to the fence
keep hands 6 inches away
1/4 inch above material
1/2 inch above material
3
When using a Drill press how many inches away should your hands be?
3-4 inches
1-2 inches
4-6 inches
2-3 inches
4
How much should the planer cut off every time it goes through the machine?
1 inch
1/2 inch
1/4 inch
1/16 inch
5
What is this measurement ?
2 11/16
11/16
2 3/4
2.6
6
Calculate board footage: 6 pieces 3/4" X 6" X 24"
.75
6
4.5
1
7
The student leadership Organization for woodworking is:
FBLA
VICA
DECA
SKills USA
8
How many Band Saws are in the wood shop?
0
2
1
3
9
When using the router table, always feed material from:
Right to Left
Left to Right
Either direction is acceptable
10
What is this Machine?
Drill Press
Mortising machine
Band Saw
Scroll saw
11
Never ______in the shop.
Work at a good speed
Fool around/ Play
Be careful
Pay attention
12
What is this Machine?
Router Table
Miter Table
Planer
Table Saw
13
How long does your board have to be to go through the jointer?
12 inches
14 inches
4 inches
6 inches
14
What is this Machine?
Wood Lathe
Wood Chiseler
Auto Wood carver
Power Sander
15
How many inches away should your fingers be when cutting on the Band Saw ?
2-3 inches
4-6 inches
3-4 inches
1-2 inches
16
What Sports has Mrs. White Coached at Auburn Riverside
Lacrosse and flag football
Hockey and flag football
Basketball and soccer
Soccer and lacrosse
17
What do you always need to be wearing on the Wood Shop Floor
Gloves and ear plugs
No Shoes, No shirt, no Problem
Flip Flops
Safety Glasses
18
Because the Jointer is easy to operate, there is no danger of a kick back?
True
False
19
What do you use to push wood into a blade?
Your Finger
Push Stick
Stick push
Any stick outside works
20
When starting the planer, what height do you need to set the machine?
1/16 inch
1 inch
The Thickness of the board - 1/16
The Width of the board - 1/16
21
What is the most common type of cut for the table saw?
Rip
Crosscut
Bevel Cut
small cut
22
When can I use my phone in Wood shop?
Whenever I want! Teachers love phones out in class!
When the sign is on green, not in the shop
When the sign is on red
Not on the floor, but any other time
23
How many table saws are in our wood shop?
What is a table saw?
1
3
2
24
What fractions are shown?
quarters
eighths
halves
tenths
25
Before leaving the band saw, what THREE things need to happen?
Lower the guard, throw scraps away, go to the belt sander
Turn Machine off, wait for blade to stop, lower guard
Scrap piece under material; be careful, clamp down material
Make sure your wood is cut; throw scraps away, turn machine off
26
How many drill presses are in the wood shop?
2
3
0
1
27
What is this measurement?
6 2/5
6 3/8
6 6/16
6 1/2
28
When using the Jointer: If your board is less then ___ inches tall, you have to use a _____.
6 inches, Pusher
4 inches, Push Stick
4 inches, Pusher
6 inches, Push Stick
29
What is this machine?
Spindle Sander
Belt Sander
Wood Lathe
Router Table
30
When should you have Safety glasses on in the wood shop?
Only when cutting/Sanding
Always, just not cleaning
Never (Eyes aren't important)
All the time anywhere in the Work shop
31
What club does Mrs. Colonna advise?
Pacific Islander
Latin X
Chess Club
Black Student Union
32
My hair style is not a problem while working in the shop?
True
False
33
which direction should you sand your piece of wood?
in circles
With the grain
Across the grain
opposite of the grain
34
When using a Router table, a faster speed always produces a better finish then a slower speed
True
False
35
What is this machine?
Router table
Drill Press
Miter Saw
Band Saw
36
The grain should go which direction when using the Jointer?
Grain In
Grain Out
37
Is It Okay to Pull Pranks in the wood shop?
Heck yea whats the biggy?!
Are you serious?
yea whats the problem?
NO
38
When cutting on the Miter Saw, how many inches away should your hand be?
4
Far enough
6
2-3
39
What fractions are shown?
fifths
quarters
thirds
halves
40
What is this measurement?
7.5
7 1/2
7 9/16
7 8/11
41
What should you never leave in the drill press?
Forstner bit
Twist drill
Quill lock key
Chuck key
42
You can earn college credit in woodworking through?
Precision Exams
AWI
Tech Prep
Skills USA
43
What is this Machine?
Radial Arm Saw
Chop Saw
Circular Saw
Miter Saw
44
What is the board footage formula?
# Pieces X 3/4 X 12 X 12
# pieces X T X W X L / 144
# pieces X W X L / 12
T X W X L / 144
45
Calculate the board footage: 2 pieces 3/4"X 1 1/4" X 42"
.36
1.5
.55
1.45
46
If your Board gets stuck going through the planer what should you do?
Put your hand in the Machine and Yell HELP!
put it in reverse
wiggle it, push it, stop the machine, lower the table
Look into the machine to see whats holding it up
47
What two things should you do to prevent from drilling into press table?
Set the depth stop, use scrap wood below
be careful, clamp down material
do not go all the way through material
set the table height, adjust depth gauge
48
When adjusting the router table, always keep your foot on the pedal
False
True
49
Your teachers are?
Mrs. Willey, Mrs. Callo
Mrs. White, Ms. Colonna
Ms. Whited, Ms. Colon
Mrs. Whiteness, Ms. Carlo
50
When using the drill press:
Do not measure before hand
Always work quickly
Use any bit for any material
Slowly cut into material to not cause tear out
51
How long does your board have to be to go through the planer?
14 inches
14 feet
12 feet
12 inches
52
How many planers are in the wood shop?
2
4
3
1
53
What do you do if you get injured, even a small splinter
Call 911 immediately
Start CPR. Stat
Tell the instructors
Go get Mrs. Mckeehan, we need her
54
The Jointer should cut off how much on each pass through?
14 inches
1/ 16 inch
1/4 inch
1/2 inch
55
Before starting a project, what two things should be completed?
all safety tests and project plans
Miter Saw and Planer tests
Project plan and Wood selection
college education and 2 years experience
56
It is safe to cut free hand on the table saw?
True
False
57
What type of cuts should you make when you are cutting a sharp angle on the band saw?
Repair
Relief
Rescue
Recycle
58
When making a cut on the Table saw, how many inches away should your hands be to not use the push stick?
4 inches
3 inches
If I have the fence, I do not need a push stick
6 inches
59
What type of bit should NOT be used on the drill press?
Twist
paddle bit
Auger
spade
60
What fractions are shown?
ninths
fifths
sixths
thirds
61
What Type of Cut would you make on the Miter Saw?
Rip and sometimes Crosscut
Rip Only
Crosscut Only
Crosscut and sometimes Rip
62
When sanding a project you should first use what # Grit Paper
220
60
100
180
63
When making a Cut on the Table Saw what Machine should you have gone through First?
Jointer
Router Table
Planer
Miter Saw
64
Running and yelling is allowed in the woodshop?
False
True
65
What is this machine?
Band Saw
Jointer
Planer
Router Table
66
Where should you stand when using the table saw
On the right side on fence, pushing material into blade
Wherever, it doesn't matter
on the left side of the blade pushing material into fence
Directly behind blade
67
When your wood is clamped, there is no need to hold your hand on the material when cutting
True
False
68
What is this Machine?
Portable hand Sander
Wide Belt sander
Wood Finisher
Spindle Sander
69
Calculate board footage: 5 Pieces 2"X 3 1/2" X 24"
5.83
1.16
1.5
5.5
70
When can I lift the miter blade?
As soon as I am done cutting
When the blade has fully stopped
After 1 second
Can leave it running
71
What is this machine?
Jointer
Table Saw
Planer
Belt Sander
72
What is this machine?
Miter Saw
Jointer
Table Saw
Edge Saw
73
What time should we start clean up?
We don't have to clean, Ms. White will do it for us.
5-6 minutes before the bell rings
3-4 minutes before the bell rings
2 minutes before the bell rings
74
When cutting on the miter Saw, what MAY cause a kick back
Not tight to the Fence
Not clamping down material
Going to Fast
Chop Cut
75
What does 14/16 reduce to?
6/15
1/2
7/8
5/10
76
Instructors Permission is needed for most machines?
Always True !
Only True on my first cut then I am free to use the machines
Who are the instructors?
Only the Stationary machines as those are most dangerous
77
When using the drill press always clamp material down
False
True
78
8/16 should be reduced to?
1/2
4/8
7/15
3/4
79
What direction should the grain go when using the planer?
Grain goes OUT of the machine
Grain goes INTO the machine
80
To control the depth of the cut, on the jointer, you would need to adjust the?
Infeed Table
Out Feed Table

Wood Shop Quiz Flashcards | StudBud