Water Distribution and Cross-Connections

What is the Factor Values (FV) for residential kitchen sink?

A fixture water supply pipe shall not exceed _____ from the point of connection to the fixture.

Lavatory faucets for public use shall limit the delivery of water to a maximum of ______ 

What is the most common form of a cross-connection?

The reversal of flow due to an increase in the downstream pressure above the supply pressure

The constant for a 45° offset is __________.

The minimum distance for an air gap is_____.

What type of backflow device is the following?

One P.S.I. of water pressure will support a column of water  _____ feet high.

Outside hose connections shall be installed in all residential buildings no more than ___ apart

What is the minimum water pipe size for a flush valved water closet?

A ______ valve shall be installed on the water supply main on the discharge side of the meter.

What type of backflow device is the following?

What type of backflow device is the following?

What type of backfow device is the following

Saddle valves are allowed to be used on the water supply line.

The Reversal of normal flow in a system caused by negative pressure in the supply piping

What is the maximum allowable water pressure allowed in a potable water system?

What is the minimum size water service pipe? 

One cubic yard contains  ______ cubic feet.

What type of backflow device is the following?

When sizing the water distribution system for a restaurant,cafe, what Demand Factor do you use?

All sillcocks shall be separately controlled by a shut off valve inside the building

What type of backflow device is the following?

If You had a Capacity Value of 18, what size water service would be required?