You are starting your shift and need to prepare the work area for distribution. What is the 1st thing u should do

Check if the equipment covers are available

Discard the items as contaminated and unusable

Label the equipment as out of service and notify the supervisor

Implement a simple manual tracking system and gradually upgrade it

What is the possible outcome if a sterilization package is not correctly sealed prior to sterilization?

A. The package could be infiltrated by microorganisms.

During a routine inspection, you identify a piece of equipment with an expired preventative maintenance label

Label the equipment as out of service and report it to the supervisor

Both the sterilization personnel and the operating room staff

Shut down the sterilizer and put a sign on it, then cont w other task

Report the issue to your supervisor.

The CSSD has been notified of a critical recall for a specific patient care equipment

Consult the tracking system to locate all units of the equipment

Verify the temperature and drain conditions before changing the cycle

Air dry the instruments before use.

A surgeon uses a term you’re unfamiliar with during a discussion. What should you do?

Ignore the term and hope it doesn’t come up again.

Conduct an immediate inventory of all equipment.

Check the Manufacturer’s IFU for troubleshooting the printer.

In a hospital setting, what is the most appropriate location to store sterile surgical instruments that are ready for us

C. In a dry, clean, and well-ventilated area

Send the instruments directly to the decontamination area.

Leave the sterilizer as it is and report the issue to your supervisor

Your supervisor sends you an email filled with surgical jargon that you do not understand. What should you do?

Reply to the email asking your supervisor for clarification.

Conducting electrical safety tests on all equipment

Which one of the following statements about the inventory method is incorrect

FIFO method means the last items received should be used first.

Which of the following identifies the types of patient care equipment correctly?

Ventilators, IV pumps, monitors

What is the appropriate placement for biological tests/process challenge devices in a sterilizer?

At the most difficult location for the sterilant to reach.

Delay processing the load and inform her supervisor of the humidity issue

Document the current reading and notify your supervisor

What is the best way to ensure the traceability of patient care equipment within a healthcare facility?

Maintain a comprehensive Equipment Control Register

What is the correct loading configuration for metal surgical instruments inside a sterilizer?

C. Arrange them side by side in a single layer, opened and disassembled

Quarantine the single pack and reprocess it.

Use the items nearing expiry first

A central service department receives a large shipment of sterile gowns. Where should these gowns be stored?

Closed cabinets with vented doors

studbud

Sterile processing practice test 3.2

51 termsStudBud Administration3 plays

Imported from external platform

Flashcards51 cardsFPractice quizPHost liveL

Questions 51

Answers

1
Look at pic
False
True
2
Look at pic
True
False
3
Look at pic
D. Both B and C.
C. Check the sterilizer for malfunction.
B. Re-sterilize the package.
A. Use the package, assuming it is an indicator error.
4
You are starting your shift and need to prepare the work area for distribution. What is the 1st thing u should do
Inspect the equipment for wear and tear
Ensure that charging stations are turned off
Immediately start processing the surgical instruments
Check if the equipment covers are available
5
Look at pic
Restock the opened sterile items on the shelf
Re-sterilize and repackage the items before restocking
Return the items to the OR to keep until needed again
Discard the items as contaminated and unusable
6
Look at pic
Use the equipment since the preventive maintenance label is up-to-date
Label the equipment as out of service and notify the supervisor
Attempt to repair the power cord
Replace the preventive maintenance label with a new one
7
Look at pic
Implement a sophisticated digital tracking system immediately
Assign staff to remember where each item is
Wait for the annual review to raise the issue
Implement a simple manual tracking system and gradually upgrade it
8
What is the possible outcome if a sterilization package is not correctly sealed prior to sterilization?
A. The package could be infiltrated by microorganisms.
D. It would shorten the sterilization cycle.
It would make the sterilization process more efficient.
. It would cause the sterilant to evaporate quickly.
9
Which of the following is NOT a part of the dress code for sterile storage area personnel?
Jewelry
Hair covering
Shoe covers
Scrub suit
10
Sterile patient care equipment should be stored in a damp area to prevent dust accumulation.
False
True
11
During a routine inspection, you identify a piece of equipment with an expired preventative maintenance label
Ignore the label because the equipment appears to be functioning fine
Attempt to perform the maintenance yourself
Replace the expired label with a new one
Label the equipment as out of service and report it to the supervisor
12
Look at pic
Both the sterilization personnel and the operating room staff
A. The operating room staff only
The hospital administration
The sterilization personnel only
13
Look at pic
Shut down the sterilizer and put a sign on it, then continue with oth
A. Try to recall the training and fix the sterilizer
Shut down the sterilizer and put a sign on it, then cont w other task
Continue to use the sterilizer but closely monitor it
14
Look at pic
Discuss the issue with other coworkers.
Confront the coworker angrily about their negligence.
Report the issue to your supervisor.
A. Ignore the problem since you’ve already tried addressing it
15
What is the acceptable range of humidity level for a typical sterile processing department
50% to 70%
40% to 60%
D. 30% to 60%
A. 20% to 60%
16
Look at pic
True
False
17
What is considered the most efficient method for distributing supplies to user departments such as clinics and ICUs?
First-In-First-Out (FIFO) system
. Last-In-First-Out (LIFO) system
A. Just-in-Time (JIT) system
. ABC analysis
18
The CSSD has been notified of a critical recall for a specific patient care equipment
Consult the tracking system to locate all units of the equipment
Contact the equipment manufacturer for further instructions
Immediately discard all units of the equipment
Inform the hospital management about the recall
19
Look at pic
Proceed with the sterilization as usual
Verify the temperature and drain conditions before changing the cycle
Change the cycle to high-temperature sterilization and then proceed
D. Disinfect the sterilizer before changing the cycle
20
In a busy hospital setting, how should a sterilization technician anticipate customer needs
By strictly adhering to the sterilization schedule
By consistently checking in with the customer
All of the above
By predicting future needs based on historical data
21
Look at pic
Re-sterilize the instruments.
Use the instruments as they are
Air dry the instruments before use.
Wipe the instruments dry and then use them.
22
Sterile storage areas can be cleaned weekly as long as there is no visible dirt or contamination.
False
True
23
Look at pic
False
True
24
A surgeon uses a term you’re unfamiliar with during a discussion. What should you do?
A. Pretend to understand the term to avoid looking uninformed.
Ignore the term and hope it doesn’t come up again.
Change the topic to avoid discussing the term.
Ignore the term and hope it doesn’t come up again.
25
Look at pic
C. Call a meeting of all CSSD staff to discuss the issue.
Inform hospital management about the discrepancy.
Ignore the discrepancy as it is only a minor issue.
Conduct an immediate inventory of all equipment.
26
A newly installed sterilizer is being prepared for use. What is the first thing that should be checked according 2 IFU
Drains
. Incubator temperature verification
Carts
A. Door gaskets
27
It’s acceptable to check and record the temperature and humidity in the SPD ate the end of day
False
True
28
Look at pic
D. Replace the printer with an older, functioning one.
C. Call a technician to fix the printer.
Start the operations and worry about the printer later.
Check the Manufacturer’s IFU for troubleshooting the printer.
29
In a hospital setting, what is the most appropriate location to store sterile surgical instruments that are ready for us
C. In a dry, clean, and well-ventilated area
In a damp, low-light location to prevent dust accumulation
Near a window for natural sterilization by sunlight
In the patient’s room for easy accessibility
30
Look at pic
Wash the instruments before sending them to the sterile storage area.
Return the shipment to the supplier due to possible contamination
Send the instruments directly to the decontamination area.
Wipe off the dust and send the instruments to the sterile storage area.
31
Look at pic
Close the sterilizer and wait for the power to return.
Leave the sterilizer as it is and report the issue to your supervisor
Close the sterilizer and wait for the power to return.
Continue to unload the sterilizer.
32
If a piece of patient care equipment has a frayed cord, but its preventative maintenance label is up-to-date is safe
True
False
33
Your supervisor sends you an email filled with surgical jargon that you do not understand. What should you do?
Look up the terms on the internet and guess their meaning in context.
Reply to the email asking your supervisor for clarification.
Ask a coworker to explain the terms to you.
Ignore the email because you don’t understand the terminology.
34
Look at pic
C. The exposure time
C. The exposure time
The temperature reading
The pressure reading
35
Look at pic
Conducting electrical safety tests on all equipment
Properly cleaning and disinfecting patient care equipment
B. Interpreting the Manufacturer’s Instructions for Use (IFU)
Conducting electrical safety tests on all equipment
36
Look at pic
False
True
37
Which one of the following statements about the inventory method is incorrect
FIFO method means the last items received should be used first.
FIFO method helps reduce waste and increase efficiency.
FIFO method helps ensure that inventory remains fresh.
FIFO method is especially important in managing supplies with exp dates
38
Which of the following identifies the types of patient care equipment correctly?
Ventilators, IV pumps, monitors
Catheters, gauze, bandages
Operating tables, ventilators, stethoscopes
Stethoscopes, gauze, surgical scissors
39
All email communication in a hospital setting should be formal in nature, regardless of the recipient.
False
True
40
What is the appropriate placement for biological tests/process challenge devices in a sterilizer?
Near the sterilizer’s door.
. On the top shelf of the sterilizer.
In the middle of the sterilizer.
At the most difficult location for the sterilant to reach.
41
Look at pic
Recall all items from the load and reprocess them.
Manually increase the humidity in the department
Document the low humidity but proceed with the processing due to urgency
Delay processing the load and inform her supervisor of the humidity issue
42
Look at pic
Close the sterile storage area until the issue is resolved
Adjust the HVAC system yourself
Document the current reading and notify your supervisor
Ignore it until the weekday shift arrives
43
What is the best way to ensure the traceability of patient care equipment within a healthcare facility?
Use post-it notes
Keep verbal records
Rely on memory
Maintain a comprehensive Equipment Control Register
44
What is the correct loading configuration for metal surgical instruments inside a sterilizer?
Pile them up randomly in a tray.
C. Arrange them side by side in a single layer, opened and disassembled
Place them individually in separate rigid containers.
D. Wrap them tightly together in a surgical cloth.
45
Look at pic
Quarantine the single pack and reprocess it.
Quarantine the entire load and reprocess them.
Recall all items from the load and reprocess them.
Use the pack anyway since all others passed.
46
Look at pic
50°F to 60
. 70°F to 75°F
60°F to 70°
D. 75°F to 80°F
47
Look at pic
True
False
48
Look at pic
Dispose of all items immediately
Ignore the issue and continue regular operations
Use the items nearing expiry first
Continue using the items on a first-come-first-serve basis
49
When dealing with critical non-stock items in the central sterile services department, what is most important
Brand of the item
. Cost of the item
Supplier of the item
Timeliness of the delivery
50
The sterilization process is the same regardless of the type of sterilizer and cycle used.
False
True
51
A central service department receives a large shipment of sterile gowns. Where should these gowns be stored?
Below sinks and plumbing lines
Open shelves near the floor
Wire cart with sealed doors
Closed cabinets with vented doors

Sterile processing practice test 3.2 Flashcards | StudBud