IED Final Studying Part 1

Question 1

The objective of a hole with a countersink is to do what?

Accepted Answer

Keep the head of the screw flush with the material

Question 2

What classifications of dimension is used to identify the physical proximity of 1 feature to another within the object?

Accepted Answer

Location Dimensions

Question 3

Calipers can perform which 4 precise measurements?

Accepted Answer

Outside diameter, Inside diameter, Step distance, Hole depth

Question 4

When using a dove tail joint to join two pieces of wood, what type of fastener would your use?

Accepted Answer

Wood Glue

Question 5

What does the 2X reference in the picture below?

Accepted Answer

Indicates there are 2 identical holes

Question 6

The basic goals of assembly constraints are to define how parts relate to each other and ___ the movement between parts.

Accepted Answer

Restrict

Question 7

The image above is an example of a dial caliper taking what type of measurement?

Accepted Answer

Stepped Depth

Question 8

During the disassembly step of reverse engineering it is important to record information using a what?

Accepted Answer

Product Teardown Chart

Question 9

The arrows on a cutting plane line indicate what?

Accepted Answer

The direction of the view

Question 10

Note: Make sure you are familiar with the order/stages of the engineering design process.

Accepted Answer

I'm pretty sure I already know it, but I'll go look it over again!, I'll go study that now!, Okie dokie!, I already am!

Question 11

What type of drawings include annotations?

Accepted Answer

Concept Sketches

Question 12

What 3D modeling tool allows you to round over an edge on an object?

Accepted Answer

Fillet

Question 13

The below image is pointing to the parts on dial caliper used for taking what type of measurement?

Accepted Answer

Inside diameter

Question 14

Circular features/cylindrical forms are common in engineering designs, and appear as ellipses in what type of drawing?

Accepted Answer

Isometric Drawings

Question 15

What classification of dimension is used to identify the size of features on the object?

Accepted Answer

Size Dimensions

Question 16

The black box in the black box model represents what?

Accepted Answer

internal components

Question 17

What type of tolerance provides an allowable variation in only one direction, either larger or smaller?

Accepted Answer

Unilateral tolerance

Question 18

Which alternate view is used to shoe "inside" details not apparent on the exterior of the part?

Accepted Answer

Section View

Question 19

The first component placed into an assembly which should be fundamental to the assembly is called what?

Accepted Answer

Base Component

Question 20

What type of tolerance provides an upper and lower limit for the dimension?

Accepted Answer

Limit Dimension

Question 21

When assembling on object there are ____ degrees of freedom to think about?

Accepted Answer

6

Question 22

Non Numerical geometric relationships that the user assigns to sketched elements are called what?

Accepted Answer

Geometric Constraints

Question 23

What type of assembly constraint constrains two faces or edges at an angle to one another?

Accepted Answer

Angle Constraint

Question 24

The type of section view where the cutting plane passes fully through the part?

Accepted Answer

Full Section

Question 25

Dimension text is placed in the middle of the line both _______________ & ______________ .

Accepted Answer

horizontally & vertically

Question 26

What assembly constraint constrain two faces, edges, points, or work features together with geometry side by side?

Accepted Answer

Flush Constraint

Question 27

Specific written information about the requirements that must be met in order to attain the intended outcome are know as

Accepted Answer

Criteria & Constraints

Question 28

Large tolerances may affect __________ of a part?

Accepted Answer

Functionality

Question 29

ANSI, ISO, DOD, MIL, & CEN are all abbreviations for organizations that set standards for what?

Accepted Answer

Dimensioning

Question 30

Solving problems, generating ideas, stimulating creative thinking, and collecting ideas without regard to feasibility

Accepted Answer

Brainstorming

Question 31

The image is an example of what type of drawing?

Accepted Answer

Multiview Drawing

Question 32

The type of dimensioning used to specify one location for distance and the angle as in the example below is called what?

Accepted Answer

Angular Dimensioning

Question 33

What type of welding applies high-frequency energy directly to the interface between plastic parts?

Accepted Answer

Ultrasonic Welding

Question 34

What 3D modeling function allows you to bevel or angle an edge?

Accepted Answer

Chamfer

Question 35

What measurement system uses inches, feet, and miles as the units for length measurement?

Accepted Answer

US Customary

Question 36

The image is an example of what type of drawing?

Accepted Answer

Concept Sketch

Question 37

Which is NOT a reason to apply reverse engineering?

Accepted Answer

Copy governments military technology

Question 38

Reverse Engineering involves which 3 steps in the correct order?

Accepted Answer

Visual analysis, functional analysis, structural analysis & disassembly

Question 39

What assembly constraint constrains an object flush into another object?

Accepted Answer

Insert Constraint

Question 40

What alternate view is used to show a close-up view of features that are too small to adequately specify in another view

Accepted Answer

Detail View

Question 41

What type of constraints are used to control the size and location of geometry?

Accepted Answer

Parametric Constraints

Question 42

What type of drawings show how parts of a multi-component design fit together?

Accepted Answer

Assembly Drawings

Question 43

What step in the Engineering Design Process includes technical drawings?

Accepted Answer

Develop A Solution

Question 44

Data Analysis occurs in what step of the Engineering Design Process?

Accepted Answer

Evaluate Solution

Question 45

What assembly constraint constrains two faces, edges, points, or axes together?

Accepted Answer

Mate Constraint

Question 46

What type if line is used to indicate where a section view is located in another view?

Accepted Answer

Cutting Plane Line

Question 47

What are the two commonly used measurement systems in the United States?

Accepted Answer

US Customary & International System of Units

Question 48

The hatch lines that indicate material that was "cut" at the cutting plane line are called what?

Accepted Answer

Section Line

Question 49

When completing a functional analysis on a product, your are trying to determine what?

Accepted Answer

The purpose and functions of the product

Question 50

What type of constraints can be tied to spreadsheets that allow for more complex mathematical formulas?

Accepted Answer

Parametric Constraints

Question 51

What 3D modeling tool mimics the manufacturing actions of a lathe or potters wheel?

Accepted Answer

Revolve

Question 52

What type of hole is only cut to a specified distance in a material?

Accepted Answer

Blind

Question 53

Which alternate view is used to shoe features that are located on an inclined surface in true size and shape?

Accepted Answer

Auxiliary View

Question 54

What type of hole is cut through the entire material?

Accepted Answer

Through

Question 55

What assembly constraint constrains a curved surface to a plane or other cured surface?

Accepted Answer

Tangent Constraint

Question 56

How did you do on this practice quiz?

Accepted Answer

Pretty good, but I should probably study some more!, I didn't do too well... I need to study more NOW!, 100%! I'm good to go!, Didn't do too bad, but I definitely need to study more.

Question 57

When selecting a machine screw for a project you see the following 3/8" - 16. What does the 16 tell you?

Accepted Answer

there are 16 threads per inch

Question 58

What 3D modeling function allows your to create a hollow or thin walled part?

Accepted Answer

Shell

Question 59

The type of section view used on symmetrical parts to show inside and outside details, and 1/4 of the part is cut away

Accepted Answer

Half Section

Question 60

What type of fit limits the size of mating parts so that an interference always results when mating parts are assembled?

Accepted Answer

Interference fit

Question 61

If the perpendicular geometric constraint is applied to two lines in a sketch, you know those two lines form a ___ angle

Accepted Answer

right

Question 62

The wood joint pictured below is an example of what type of joint?

Accepted Answer

Dovetail Joint

Question 63

Line, Color, Shape, & Texture are examples of what?

Accepted Answer

Elements of Design

Question 64

Tolerances that are too small will affect the cost of the part because the manufacturing process will more ______.

Accepted Answer

Precise

IED Final Studying Part 1

Questions 81

IED Final Studying Part 1

Questions 81