EC FINAL REVIEW Spring 2021

The structure found at the ends of a bridge that provide reaction forces and support the structural load.

The detailed descriptions of the design standards for a part or product are called ________.

After making a prototype of a new bridge design. What would happen while working through the Engineering Design Process.

The result of dividing a tensile force by the cross sectional area of a structural member.

Design portfolios, design journals, sketches and schematics are all used to do what?

According to Newton's first law of motion, in the absence of an external force, a moving object will ____________.

When a product has two different requirements that compete with each other, it is known as a ________?

The third course in the engineering pathway is.

What is the proper terminology to describe the distance that a roadbed of a bridge drops when it is under load.

A(n) _________ designs structures.

If a structure is to resist a load, it can only do so by pushing back at it with the same force that is equal and ___?

A computer with ________ capabilities surrounds the engineer with a design and the view changes as their head turns.

How many mm are in a kilometer?

Use of scientific & engineering knowledge and methods combined with technical skills supporting engineering activities.

The FIRST working model of a new design that is used for testing.

Which of the following is not considered to be a STEM career?

A systematic way of developing a solution to a problem that will best satisfy design requirements.

Entries in an engineering notebook should always be made in _____________.

A squeezing force.

The major difference between entrepreneurs and other innovators is that____________.

Ergonomics involves _________?

The CTSO that is available for students in the Engineering programs in GA is called what?

Field of engineering concerned with optimization of resources in operation of systems?

In technology, adapting means

Every page of an engineering notebook MUST include the following.

The best way to test a prototype is by _______________.

Which of the following is NOT a benefit of making a model of a proposed product?

When designing a bridge, civil Engineers must consider which of the following?

When conducting engineering tests, data that CANNOT be measured in units is called_____.

When conducting engineering tests, data that CAN be measured in units is called ________.

Students in the Engineering lab should only use equipment _________?

A stretching force.

The "Galloping Girdie" was which of these famous bridges?

Flat plates that are used to strengthen the connection between members of a truss.

A(n) ________ is a force that is applied to a structure.

ABET stands for?

How many mm are in a meter?

Everybody should get this answer right.... please select "the correct answer" below

A(n) __________ drawing shows parts in their proper places and how they fit together.

16m3 …. is a measure of what?

Field of engineering concerned with the design of manufacturing facilities & processes to optimize productivity?

The point on a load deformation curve when a material breaks is called the _______ point.

The IEEE is the professional organization for what group?

A chart used to pick the best possible solution by scoring ideas' abilities to meet the engineering requirements.

What geometric shape in engineering can only be changed by breaking one if its sides or taking apart one of its corners?

Any engineer's primary focus should be what?

Analyzing a prototype to see if it works as predicted is called ________.

Any force that is applied to a structure.

When engineers strive to achieve maximum efficiency and it gives the perfect solution in designing and operation.

In the design process, the step after building a prototype is typically

Brainstorming is one way to promote

Engineers are concerned with ________?

Which is NOT a step in the problem solving process?

ASME is the ________.

The process of dismantling and examining a competitor's product to get design ideas would be regarded as

645in2 …. is a measure of what?

What does an engineer do at the bottom of every page in their engineering notebooks?

Which of the following is an example of a career related to the transportation industry?

Every solution generated while brainstorming must be ________ before picking the best possible solution.

A rigid structure made up of connected members arranged to form traingles.

When the tensile and compressive forces in a truss are balanced, it can be said that the structure is in ________.

What can be done to increase the amount of tension load that a structural member can handle before breaking?

Designing a mouse for a computer to fit well in your had would demonstrate

Collaboratively generating as many solutions as possible without judging them.

An exclusive right to sell any new and useful process, machine, or product for a set number of years is called?

What is a product specification?

Which type of worker would be most likely to use schematic diagrams

If an engineer wants to create a 1:4 scale model of a car that is normally 60" tall, how tall will the model be?

A 3D model of a proposed product is a ________?

A model is a replica that

What can be done to increase the amount of COMPRESSION load that a structural member can handle before it buckles?

Civil engineers may work on any of the following except

The SI unit for a force is?

A mock-up (model) can be made after _________.

Specific goal directed research conducted by a company to design new inventions or innovations is called _________.