day 30 review

A spray gun should not be lubricated because it will contaminate the finish when spraying.

Some spray application techniques call for medium wet coats.

 “Proper ____________________ Prevents Poor Paint Performance.”

If the air cap horns are set at the horizontal position, the spray pattern will be vertical.

When catalyst is added to a polymer, it speeds up cross-linking.

Once paint and solvents are mixed together, they cannot be separated again.

Whenapplying colorusing the panelpainting technique,gunanglesmust bekept perpendiculartothepanel, withtheproper distance

The measurement of how much paint is applied to the paint job from a spray gun is called transfer ____________________.

Even colors that are severely mismatched can be successfully blended.

Most paint manufacturers suggest the _ reduction method for reducing the product to properly pass through the spray gun.

HAPs are harmful ____________________ pollutants.

A spray pattern test should be performed once all the spray gun adjustments have been rechecked.

Volatile _______ compounds are gases released during paint application.

____________________ painting is a technique used when the color is known to be a perfect match.

____________________ viewing means the technician looks at the panel being sprayed at a 45-degree angle.

HVLP is an acronym for high ____________________ low pressure.

HVLP spray guns not only cut material costs, but are also required in some areas.

Transfer efficiency measures how much of the finish material placed in the gun is transferred to the target surface.

The most accurate way to reduce paint is on the paint mixing scale, by weight.

A refinish technician will always need to spray finish to a full wet coat.

The chemical process by which paints cure is called ____________________-linking.

Atomization starts inside the gun at the needle and nozzle.

The first solvents to evaporate from paint are leveling solvents.

Some undercoats are designed to perform more than one function.

The time that must pass before applying additional coats of a coating is referred to as ____________________ time.