stud
bud
Sign up
Log in
Home
Library
Explore
SAT
More
Gerard Noguer Comas Flashcards | StudBud
Explore
/
Gerard Noguer Comas
Gerard Noguer Comas
100 terms
·
StudBud Administration
Imported from external platform
Flashcards
100 cards
F
Practice quiz
P
Host live
L
Questions
100
Answers
1
What is the function of fieldbuses in programmable controllers?
Supply power to the I/O modules
Act as communication interfaces for the sensors
Control the CPU module
Connect the automaton to external networks
2
When does a positive flank occur?
When a signal remains constant at a high level
When a signal transitions from low to high
When a signal remains constant at a low level
When a signal transitions from high to low
3
Which industry commonly utilizes programmable automata?
Banking
Entertainment
Agriculture
Fashion
4
What is the purpose of the scan cycle in a PLC?
Receive signals from the sensors
Establish communication with external devices
Execute the programmed logic and update outputs
Control the distribution of energy
5
What is the maximum number of digital outputs in the S7-1200 (programmable automaton)?
16
12
24
8
6
Which component of a PLC is responsible for monitoring and controlling the I/O signals?
Power supply unit
Communication interface
Central Processing Unit (CPU)
Input/Output (I/O) modules
7
How many flights does a PLC normally operate?
230V CC
25V
24V CC
150V CC
8
What communication interface is this?
Ethernet
RS-485
RS-232
USB
9
Which of these cases are input devices?
Push buttons and switches
solenoid valve
relay
electric heater
10
What is the main function of data memory in a PLC?
Receive signals from the sensors
Process and execute the programmed logic
Store the program instructions
Control external devices
11
Which automaton has been used to model complex systems, simulate physical phenomena, and study emergent behavior?
Turing Machines
Pushdown Automata
Finite State Machines
Cellular Automata
12
In a PLC, what is a flank?
A sudden change in a signal from low to high or high to low
A type of sensor used for input
A physical contact closure
A type of output device
13
Which of the following is a typical communication interface supported by Compact PLCs?
USB
RS-232
Wi-Fi
Ethernet
14
What happens when the set function is activated in a PLC?
The output devices turn off
The input devices are disabled
The output devices turn on
The PLC enters a standby mode
15
Which component serves as the core of a programmable automaton?
Communication module
Output module
CPU module
Entry module
16
What is the main function of the CPU module in a programmable automaton?
Control external devices
Interface with sensors and actuators
Connect to external network
Process and execute the programmed logic
17
What type of devices are used to detect and measure physical quantities in a programmable automaton?
Sensors
I/O modules
Actuators
CPU
18
How many inputs and outputs can the S7-1200 CPU have?
15 or 7
16 or 8
16 or 5
12 or 8
19
Which company played a crucial role in popularizing programmable automata in the 1980s?
Apple
IBM
Intel
Microsoft
20
What is this type of PLC?
Rack-mounted PLC
Safety PLC
Modular PLC
Compact PLC
21
What is the purpose of using flanks in PLC programming?
To enable communication with external devices
To trigger specific actions based on input changes
To control the timing of operations
To perform mathematical calculations
22
How are flanks used in ladder logic programming?
They are used to connect inputs and outputs
They are used to store temporary data
They are used to perform mathematical calculations
They are used to control the flow of the ladder program
23
Which timer in a PLC is used to provide a delay before activating an output when an input signal is present?
Accumulation timer
Retention timer
ON - Delay timer
OF -Delay timer
24
Which component serves as an interface between a programmable automaton and external devices or processes?
CPU module
I/O module
Communication module
Sensor
25
How are set and reset functions typically triggered in a PLC?
Through a physical switch or button
By using voice commands
By sending a command through a network connection
Automatically based on predefined conditions
26
What is the purpose of sensors in a programmable controller?
Establish communication networks
Provide power to the I/O modules
Control the CPU module
Monitor the environmental conditions
27
What is the benefit of using programmable automata in manufacturing?
Improved product quality and consistency
Increased production costs
Higher employment rates
Longer production cycles
28
Which of the following languages can be recognized by a Pushdown Automaton (PDA)?
Recursively enumerable languages
Context-free languages
Regular languages
Context-sensitive languages
29
What is the typical power supply voltage for the LOGO! (programmable automaton)?
230V AC
24V DC
48V DC
120V AC
30
What does PLC mean?
Programmable language conection
Programmable language controller
Programmable logic conection
Programmable logic controller
31
What are the addresses of the S7-1200 outputs called?
I0.0 I0.1 I0.2 ...
T0.0 T0.1 T0.2 ...
S0.0 S0.1 S0.2 ...
Q0.0 Q0.1 Q0.2 ...
32
Which of the following is a common safety function performed by a Safety PLC?
Motor speed regulation
Emergency stop
Data logging and reporting
Temperature control
33
What does the transistor output do?
Makes the automaton give 24v to the activated outputs
Makes the automaton give 230v to the activated outputs
Causes the automaton to close a free contact
Causes the automaton to open a free contact
34
What is this type of PLC?
Safety PLC
Modular PLC
Compact PLC
Rack-mounted PLC
35
What is the power supply voltage range for the S7-1200 (programmable automaton)?
230V AC
48V DC
120V AC
24V DC
36
From the reset, what does set mean?
deactivation
memory
simulator
activation
37
How are programmable automata programmed?
By writing code or using visual programming tools
By manually adjusting gears and levers
Through voice commands
Through telepathic communication
38
Why can automatons include communication interfaces?
to disconnect from external networks or systems
To connect to the computer PC
to connect to external networks or systems
to connect to PLCs
39
Which automaton can store and retrieve data from a stack, allowing them to recognize languages?
Cellular Automata
Finite State Machines
Pushdown Automata
Turing Machines
40
What communication protocol is commonly used to connect PLCs to peripheral devices?
Bluetooth
RS-232
Ethernet
USB
41
Which automaton is used for software engineering and natural language processing?
Turing Machines
Finite State Machines
Pushdown Automata
Cellular Automata
42
What is this?
Open contact
coil
Contact denied
counter
43
What is the primary purpose of a Pushdown Automaton (PDA)?
Recognizing regular languages
Solving mathematical equations
Simulating Turing machines
Parsing context-free languages
44
Which type of instruction is used to control the execution flow in KOP programming?
Branch instructions
Counter instructions
Arithmetic instructions
Timer instructions
45
What sensor is this?
vision system sensor
temperature sensor
proximity sensor
pressure sensor
46
Which programming language is commonly used to program automata?
Python
JavaScript
AutomataScript
HTML
47
What is the purpose of programmable automata?
To predict lottery numbers
To perform complex mathematical calculations
To automate repetitive tasks
To simulate weather patterns
48
Which instruction is used to perform a logical AND operation in KOP language?
NOT
XOR
AND
OR
49
When does a negative flank occur?
When a signal transitions from high to low
When a signal transitions from low to high
When a signal remains constant at a high level
When a signal remains constant at a low level
50
Which automaton consists of an infinitely long ribbon divided into cells?
Cellular Automata
Turing Machines
Finite State Machines
Pushdown Automata
51
What is the purpose of I/O modules in a programmable controller?
Establish communication networks
Control external devices
Treat and analyze data
Provide energy distribution
52
Which PLC is this?
S7-400
S7-300
LOGO!
S7-1200
53
What communication interface is this?
Ethernet
RS-485
RS-232
USB
54
What is the purpose of the set and reset functions in a PLC?
To control the state of output devices based on input conditions
To power on and power off the PLC
To change the programming language of the PLC
To initiate emergency shutdown procedures
55
What type of timer starts timing when it receives an input signal and stops timing when the signal is no longer present?
Retention timer
ON - Delay timer
Accumulation timer
OFF - Delay timer
56
What sensor is this?
pressure sensor
temperature sensor
vision system sensor
proximity sensor
57
How often does a PLC scan cycle?
Eleven per minute
Once on start-up
Continuously and repeatedly
Eleven per second
58
Which communication interface is commonly used with the LOGO! (programmable automaton)?
RS-232
Wi-Fi
Ethernet
USB
59
Which network protocol is commonly used for real-time communication and control of PLCs in industrial applications?
Bluetooth
Ethernet/IP
Wi-Fi
USB
60
What type of module is responsible for receiving the signals from the sensors of a PLC?
Entry module
Communication module
CPU module
Input module
61
Which year marked the introduction of the first programmable automaton?
1950
1974
1960
1942
62
How are output coils represented in KOP programming?
I1.2
M3.4
B2.5
Q0.0
63
What communication interface is this?
USB
RS-232
Ethernet
RS-485
64
What sensor is this?
temperature sensor
pressure sensor
proximity sensor
vision system sensor
65
What are Programmable Automations?
Robotic system
Sequential system
Machine programming
Computer language
66
What is the maximum number of digital inputs in the S7-1200 (programmable automaton)?
8
16
12
24
67
What is the maximum number of analog inputs in the LOGO! (programmable automaton)?
1
8
2
4
68
Which PLC is this?
S7-400
S7-1200
LOGO!
S7-300
69
Which of the following is an example of a communication module commonly used in a Modular PLC?
Analog output module
Counter module
Ethernet module
Thermocouple module
70
What is the main function of a power-off delay timer in a PLC?
Provide a delay before activating an output
Stop timing when there is an input signal
It measures the time elapsed between two events
Count the number of input pulses over time
71
What network communication standard is commonly used to connect to field devices and sensors in industrial automation?
Wi-Fi
Bluetooth
Modbus
USB
72
What is this type of PLC?
Compact PLC
Rack-mounted PLC
Modular PLC
Safety PLC
73
What is the operation of a PLC called?
PLC programming language
PLC execution
scan cycle
CPU cycle
74
What type of memory in a PLC is used to store program logic and instructions?
Input memory
Program memory
Exit report
Communication report
75
What is the purpose of the backplane in a programmable controller?
Process and execute the programmed logic
Control external devices
Provide energy distribution
Connect the I/O modules
76
Which type of module is typically used to expand the number of analog inputs in a Rack-mounted PLC?
Analog input module
Analog output module
Counter module
Digital input module
77
What is the purpose of a network in KOP programming?
To connect multiple PLCs
To group related instructions
To perform mathematical operations
To control hardware components
78
Which instruction is used to set the value of an output coil in KOP language?
SET
RESET
LATCH
UNLATCH
79
What is this type of PLC?
Compact PLC
Rack-mounted PLC
PLC modular
Safety PLC
80
What is this kop language symbol?
open contact
coli
contact closed
timer
81
Which type of module is typically used to increase the number of digital inputs in a Modular PLC?
Analog input module
Communication module
Digital input module
Relay output module
82
What is the purpose of an input module in a PLC?
Control external devices
Receive signals from the sensors
Provide energy distribution
Establish communication with external networks
83
Which component is essential for a programmable automaton?
Bluetooth connectivity
Power supply
Audio speakers
GPS receiver
84
Who is considered the "father" of modern programmable automata?
Alan Turing
Alan Turing
George Boole
Konrad Zuse
85
What are the addresses of the S7-1200 inputs called?
I1 I2 I3 ...
I0.0 I0.1 I0.2 ...
A0.1 A0.2 A0.3 ...
E1 E2 E3 ...
86
What is the purpose of a rack in a Rack-mounted PLC system?
To provide power to the PLC
To facilitate programming and debugging
To provide network connectivity
To hold and organize the PLC modules
87
What does the CPU of a PLC do?
Responsible for controlling the temperature of the break room
the program, processes the input signals and controls the output devices
Controls the volume of the factory speakers
Regulates the water supply for the office coffee machine.
88
What is the typical power supply voltage range for a Compact PLC?
24V DC
230V AC
48V DC
120V AC
89
What is the purpose of the reset function in a PLC?
To clear the memory of the PLC
To restore the PLC to its initial state
To stop the execution of the program
To change the programming language of the PLC
90
What sensor is this?
vision system sensor
proximity sensor
pressure sensor
temperature sensor
91
What is this kop language symbol?
timer
coil
contact closed
open contact
92
What is the maximum number of digital outputs on the LOGO! (programmable automaton)?
16
12
4
8
93
What communication interface is this?
USB
RS-232
Ethernet
RS-485
94
What is the future potential of programmable automata?
Replacement of human workers in all job sectors
Integration into every aspect of daily life, revolutionizing industries
Limited to simple tasks with no further advancements
Strictly confined to research laboratories
95
What is the main function of an output module in a PLC?
Control external devices
Process and execute the programmed logic
Provide energy distribution
Receive signals from the sensors
96
Which of these cases is an output device?
selector
relay
switch
Push button
97
Which programming concept is commonly used in designing automata?
Declarative programming
Object-oriented programming
Functional programming
Procedural programming
98
What is the primary purpose of a Safety PLC?
To reduce energy consumption
To improve system performance
To ensure the safety of personnel and equipment
To enable remote monitoring and control
99
From the reset, what does reset mean?
deactivation
activation
feed the input
feed back
100
Which component of a PLC is responsible for communication between the PLC and external devices?
Power supply unit
Communication interface
Central Processing Unit (CPU)
Memory
