What is one of the general requirements for machine guarding under OSHA 1910.211?

Guards must protect against flying chips and sparks

OSHA 1910.211 requires that guards must be constructed to prevent:

Contact with dangerous parts of machinery during operation

OSHA 1910.211 specifies that emergency stop devices should be:

Easily accessible to the operator

What should be the condition of machine guards according to OSHA 1910.211?

Properly maintained and kept in place while the machine is in operation

OSHA 1910.211 specifies that the design of machine guards should ensure that:

The operators body parts are prevented from making contact with movingparts

According to OSHA 1910.211, what is considered a "point of operation"?

The area where work is actually performed on the material.

Which of the following is a requirement for the placement of guards as per OSHA 1910.211?

Guards should be placed so they don't interfere with the operation.

OSHA 1910.211 mandates training for employees on machine guarding. What should this training include?

Proper usage and limitations of the guards

What is the main purpose of OSHA Standard 1910.211

To outline safety requirements for machinery and machine guarding

studbud

Machinery and Machine Guarding

10 termsStudBud Administration1 play

OSHA 1910.211

Flashcards10 cardsFPractice quizPHost liveL

Questions 10

Answers

1
What is one of the general requirements for machine guarding under OSHA 1910.211?
Guards must protect against flying chips and sparks
Guards must be checked once a year
Guards must be expensive and high-tech
Guards must be removed after every shift
2
Which of the following is NOT a type of machine guard mentioned in OSHA 1910.211?
Fixed guard
personal guard
interlocked guard
adjustable guard
3
OSHA 1910.211 requires that guards must be constructed to prevent:
Noise pollution in the workplace
Contact with dangerous parts of machinery during operation
Unauthorized personnel from entering the building
The entry of insects
4
OSHA 1910.211 specifies that emergency stop devices should be:
Used only during maintenance
Located outside the work area
Installed at every entrance of the building
Easily accessible to the operator
5
What should be the condition of machine guards according to OSHA 1910.211?
Lubricated regularly
Painted with high-visibility colors
Properly maintained and kept in place while the machine is in operation
Easily removable by hand
6
OSHA 1910.211 specifies that the design of machine guards should ensure that:
The machine can be moved easily from one place to another
The operators body parts are prevented from making contact with movingparts
Only certified personnel can operate the machine
The machine operates at a lower speed
7
According to OSHA 1910.211, what is considered a "point of operation"?
The control panel of a machine
The area where work is actually performed on the material.
The point where machinery is installed
The location where machine operators take their breaks
8
Which of the following is a requirement for the placement of guards as per OSHA 1910.211?
Guards should be placed only on machines that operate above 100 RPM
Guards should allow easy access for routine lubrication of the machine
Guards should be placed so they don't interfere with the operation.
Guards should be installed by a certified engineer
9
OSHA 1910.211 mandates training for employees on machine guarding. What should this training include?
Financial aspects of machine maintenance
Proper usage and limitations of the guards
Techniques for increasing production speed
The history of OSHA regulations
10
What is the main purpose of OSHA Standard 1910.211
To establish guidelines for emergency evacuation procedures
To outline safety requirements for machinery and machine guarding
To mandate workplace fire safety protocols
To regulate the use of personal protective equipment (PPE)

Machinery and Machine Guarding Flashcards | StudBud