Duplicate of SEAM 1 - FINALS

carrying heavy cargo, the containers should be securely tied at all times. Sudden lurching of the ships may cause to?

While it is perhaps easy to talk about what a safety culture is, but in fact it is somewhat harder to?

What kinds of gloves you are going to wear during maintenance routine job to avoid injury?

1st of a vital component of safety and is being aware of the risks posed to you and others this vital component is?

equipment mandatory for ships to ensure that crews are safe and there are no fatalities due to not wearing the proper?

It is a paint system applied to any part of a ship?

very important that removes loosened dirt from the surface along with the cleaning material?

____________ is the most efficient method for preparing the surface for painting?

Safety meetings are conducted every week by all the crew onboard the main objective of this meeting is?

 In hot and humid condition what should you do to prevent exhaustion and heat stroke?

Mill scale is a thin layer of iron oxides which forms on the steel surface during?

However now that tougher paints are used for the ship’s?

What is the main purpose of angle grinder onboard ship during maintenance?

Today many ships are reducing crew capacity onboard merchant marine vessel they are estimated only to?

Before painting on the clean area which are being chipped or de rusted what paint should be apply first?

All new personal joining a ship must undergo a?

 Safety shoe qualifications should be?

In case of climbing or descending a staircase, the equipment should be carried

What is most common eye injuries onboard ship what causes it?

common accident that always occurs every now and then and this the shipping common problems?

It is particularly important before painting new steel that any mill scale should be?

What is the primary usage of chipping hammer onboard ship?

The cleanliness of the ship and crew and specially galley is?

famously known as the PMS or Planned Maintenance System. In this type of system the maintenance is carried out as per?

The maintenance interval  are decided in the plan is based on the following 1st important factors?

maintenance plan followed by every shipping company to ensure that the ship’s machinery maintains a particular standard

preparation for deck maintenance that the surface of the object being cleaned must be wetted

What is the main purpose of needle gun onboard ship during maintenance?

What is the main purpose of wire brush onboard ship during maintenance?

The systematic and planned maintenance procedure is made which also forms an integral part of ship’s?

It’s an efficient planning and adequate usage of equipment’s is the main key to?

Ship familiarization on new joiners or crew are as per?

Onboard ship during maintenance a Good surface preparation is essential to?

It is a process of remove the mill scale and rust from the surface?

Dangerous cargo Safety instructions must be followed and the cargo must be labeled and?

The painting of the external ship structure was divided into three regions what is the first region?

What is the main purpose of scaling machines onboard ship during maintenance?

 Marine Paints may contain toxic or irritant substances, and the solvents may give rise to?

The main aim of any maintenance plan on ship is to get the maintenance and repair work done in the?

Onboard the operating crew must be well-trained in using the communication equipment with due awareness of all?

there are so many rules in place and  In addition, each ship and shipping company has its own set of?

While making a maintenance plan, several aspects are taken into consideration, starting from the?

_____________ is a kind of maintenance that gives the worst result?

Dangerous Cargo consists of a highly flammable fuels and toxic gas and such dangerous cargoes must be stored away from?

When going down or going up on a stairs you should?

 In the earlier days, the number of crew members and engineers on a ship were?

When working at heights and outboards you should always wear a?

inspection and test to be employed during dry-dock are– visual, vibration, pressure, temperature, electrical, load and?

In the present scenario, today the number of crew members and engineers on the ship has reduced?

Portable power tools such as drills and welding equipment should be checked before?

keeps any mechanical equipment or machinery going. Weather it is a small machine or a large structure?

Drinking onboard ship are not permitted because it can cause?

All crew duties and responsibilities onboard ship are can be found at?

What are the most accidents onboard ship due to fellow crew’s negligence?

In maintenance on ship ___________ is preferred for best results and economy in shipbuilding?

does not entirely remove the mill scale and rust but it can be quite useful for cleaning plates under inclement weather

Lack of crew is the main problem onboard ship especially in engine room in anticipation of this you must?

often used to ensure that the inspection, test &maintenance according to the guidelines of manufacturer and the ISM code

While somebody is working at the radar mast or machinery you should?

maintenance plan is to make sure that the work is done in the least possible time with utmost efficiency and at?

where the maximum machines are located, engineers and crew carry out the maintenance for safe and efficient?

What is the meaning SCBA?

paint should have a good electrical resistance so that the flow of corrosion currents between the steel and sea water is

The following points into consideration History of equipment including failures, defects, damagers, and?

The Anti-fouling paints offer protection against_____?

protects user against health or safety risks, and includes items such as safety helmets, gloves, eye protection, etc.

 A safety helmet is protection against?

During onboard maintenance paint failures being the inadequacy of the initial?

The personal protective equipment includes safety helmets, shoes, goggles, ear-muffs and?

HSEQ have a lot of expectation that to be prevented what is the first objective?

Corrective Maintenance is a one system that the maintenance is carried out when the machinery is?

Good HSEQ performance on Safety of shipmates depends on the action of the?

 __________ is much less effective maintenance methods onboard ships?

The personal protective equipment doesn’t reduce the hazards but?

The no 1 common methods employed to prepare steel surfaces for painting is?

it is desirable to brush the surface, and apply a coat of priming paint as soon as possible since the metal is

This form is the most important aspect of the maintenance plan on board ship and in dry-dock which for is this?

It is one of the preparation for deck maintenance that Dirt is loosened by the mechanical action of rubbing?

To avoid accident or incidents the ship crew should bi familiar with the?

Fire is a constant risk at sea, crew onboard have a role to play to safeguard against it. There are many basic steps to?

HSEQ have a lot of expectation that to be prevented what is the last objective?

In this system the machinery parts are checked regularly. With the help of sensors etc. what system is this?

When lifting a heavy carton or a box  alone you should put the weight into your?

What is the main purpose of scrapper onboard ship during maintenance?

  ______________ which also gives good results can be expensive and less applicable to production schemes?

On all company they are all have a QMS manual What is QMS Means?

When the worst does happen onboard ship we must follow this vital component for safety this vital component is?

 Below the Water-line the ship’s bottom has priming coats of?

 In any workplace there should be a ___________ for all workers should have a

What causes the other engineer to slept even he is wearing a safety shoes?