stud
bud
Sign up
Log in
Home
Library
Explore
SAT
More
ATP1: Small Sewing/Pressing Equipment, The Sewing Machine, & The Serger Flashcards | StudBud
Explore
/
ATP1: Small Sewing/Pressing Equipment, The Sewing Machine, & The Serger
ATP1: Small Sewing/Pressing Equipment, The Sewing Machine, & The Serger
27 terms
·
StudBud Administration
·
94 plays
Imported from external platform
Flashcards
27 cards
F
Practice quiz
P
Host live
L
Questions
27
Answers
1
IN ORDER TO OPERATE THE SEWING MACHINE, PRESS DOWN ON THE:
FEED SYSTEM
THREAD GUIDE
PRESSER FOOT
FOOT/KNEE CONTROL
2
When you are ready to begin sewing, how should you check the threading of the machine?
Thread a second time.
Run a sample on a test strip or fabric scrap.
Compare with a classmate.
Ask teacher to check it.
3
When 2 fabric pieces are sewn together incorrectly, what tool should be used?
SHEARS
SEAM RIPPER
RAZOR BLADE
ROTARY CUTTER
4
What is
ALWAYS
threaded last on a serger?
LOOPERS
NEEDLES
THREAD GUIDES
TENSION DIALS
5
What is the
BEST
source of information about the use & care of the sewing machine?
CLASSMATE
INTERNET
TEACHER
OWNER'S MANUAL
6
These SHEARS should be used to the raw edge of a piece of fabric to prevent raveling.
EMBROIDERY SHEARS
THREAD CLIPPERS
PINKING SHEARS
FABRIC SHEARS
7
You were sewing in class when the thread broke on your machine! What's probably wrong?
Stitching in Reverse too long.
Wrong color of the thread.
Incorrect threading of the machine.
Power switch left on.
8
What kinds of pins have rounded points and are used on knitted fabrics?
STICK PINS
SAFETY PINS
BALLPOINT PINS
BOBBIE PINS
9
What does a 4-thread serger do?
Cut seam allowances off but NOT overcast the seam edge.
Cut seam allowances off only.
Cut seam allowances off & overcast the seam edge.
Cut seam allowance off and color the fabric.
10
This piece of pressing equipment is used to press curved areas on a garment?
IRON
PRESS CLOTH
IRONING BOARD
TAILOR'S HAM
11
THE SEWING MACHINE NEEDLE IS HELD IN PLACE BY THE NEEDLE:
THREAD TENSION DIAL
PLATE
SPOOL PIN
CLAMP
12
What part of the sewing machine allows the operator to fill the bobbin with thread?
BOBBIN WINDER
THREAD GUIDE
FEED SYSTEM
PRESSER FOOT
13
This must be used with a
ROTARY CUTTER
in order to prevent damage to your cutting surface.
PLACE MAT
SELF-HEALING MAT
FLOOR MAT
CAR MAT
14
This part of the sewing machine moves the fabric under the presser foot.
BOBBIN
HAND WHEEL
NEEDLE
FEED DOG
15
SHEARS
should be used to cut:
CARDBOARD
WIRE
PAPER
FABRIC
16
While constructing your pants, what tool could you use to prevent the seams from raveling?
DRESSMAKER SHEARS
PINKING SHEARS
EMBROIDERY SCISSORS
ROTARY SHEARS
17
Serged stitches can easily be removed by using a:
DRESSMAKER's SHEARS
PINKING SHEARS
SEAM RIPPER
ROTARY CUTTER
18
SEWING shears should be used to cut:
WIRE
FABRIC
CARDBOARD
PAPER
19
WHAT PART OF THE SERGER WORKS WITH THE LOOPERS TO FORM STITCHES?
NEEDLES
REVERSE OPERATOR
HAND WHEEL
KNIVES
20
WHAT tool would you use to measure the width of a hem?
Tape Measure
String
Yardstick
Seam Guage
21
Tracing wheel, carbon paper, tailor's chalk, & fabric pens are what type of sewing equipment?
MARKING
MEASURING
PRESSING
CUTTING
22
WHICH PART OF THE SEWING MACHINE HOLDS THE FABRIC IN PLACE DURING STITCHING?
BOBBIN
PRESSER FOOT
STITCH REGULATOR
NEEDLE CLAMP
23
What determines the type of needle to use in a sewing machine?
Difficulty level of the pattern.
Brand of the thread.
Stitching speed.
Type of fabric.
24
On what part of the sewing machine will you find guides for seam allowances, like 5/8" or 1/2"?
STITCH LENGTH REGULATOR
NEEDLE PLATE/THROAT PLATE
PRESSER FOOT
BOBBIN CASE
25
What operation should complete the end of a serged seam?
REDUCE THREAD TENSION
BACK STITCH
REINFORCED STITCHING
CHAIN OFF
26
Which part of the sewing machine regulates the
width
of zig-zag stitches?
HAND WHEEL
STITCH WIDTH REGULATOR
FEED SYSTEM
SPEED CONTROLER
27
What can a
SERGER
do that a regular sewing machine
CANNOT DO
?
Make Buttonholes
Trim, Stitch & Overcast in 1 Step
Embroider Designs
Baste Seams
