An employer's energy control program must contain the following:

Energy control procedures, training, periodic inspections

Electric power tools are very hazardous when used improperly, therefore power tools must:

Be fitted with guards and safety switches

Permit-required confined spaces (i.e., permit spaces):

Confined space containing one or more serious safety hazards

The OSHA standard on fire extinguishers (1910.157)

Covers placement, use, maintenance and testing of fire exts

Class A fires involve:

Ordinary combustible materials such as paper and wood

The purpose and elements of a fire prevention plan may be orally communicated to employees:

If there are 10 or fewer employees

OSHA requires that powered industrial truck operators:

Be certified by the employer as trained and evaluated

Walk/Work standard "all places of employment, passageways, storerooms, service rooms shall be"

Kept clean and orderly and in a sanitary condition

Lockout and tagout devices must be:

Standardized in at least one color, shape or size

True statement regarding atmospheric hazards in permit-required confined spaces (permit spaces)

Most hazards are seen or smelled, air monitoring not needed, Gases and vapors heavier than air accumulate in lower areas

An employee is cleaning the parking lot and is injured as a result. Is the case work-related?

Yes, conducting company business in the work environment

Purpose of equipment grounding conductor in a branch circuit or portable electrical equipment

Protect workers from electrocution from fault/short in tool

What are the three basic hazardous areas of machinery that need safe guarding?

Point of operation,power transmission apparatus,moving parts

studbud

OSHA #501 Review

25 termsStudBud Administration27 plays

OSHA #501 Review

Flashcards25 cardsFPractice quizPHost liveL

Questions 25

Answers

1
An employer's energy control program must contain the following:
Safety signs, electricl interlocks, training for sup and emp
Written program, qualified persons, insulated tools
Certified equipment, appropriate signage,supervisor training
Energy control procedures, training, periodic inspections
2
Electric power tools are very hazardous when used improperly, therefore power tools must:
Be fitted with guards and safety switches
Not be used by more than one worker
Not be stored near oxy-acetylene or other flammable gas cyl
Be used within 10 feet of their power source
3
Blades of a fan less than 7 feet above the floor - blade guards have openings no larger than_"
1"
1/2"
3/4"
1/4"
4
One method most often used to ensure that wheels for power abrasive grinder are safe to operate
Ring tests
X-rays
Speed calibration tests
Visual inspections by qualified persons
5
Permit-required confined spaces (i.e., permit spaces):
Confined space containing one or more serious safety hazards
Have only one way in and out
Can't be entered if atmosphere contains mo than 23.5% oxygen
Must be mechanically ventilated because of no natural vent
6
The OSHA standard on fire extinguishers (1910.157)
Covers placement, use, maintenance and testing of fire exts
Covers only those fire extinguishers which are used indoors
Requires sups and emps to be trained on the use of fire exts
Requires total evacuation in case of fire
7
How many gallons of Cat. 2,3,4 flammable liquid may be stored on shelves before need cabinet?
10
100
120
55
8
Class A fires involve:
Flammable or combustible liquids such as gasoline and oil
Electrical equipment such as appliances and circuit breakers
Ordinary combustible materials such as paper and wood
Combustible metals such as magnesium and sodium
9
The purpose and elements of a fire prevention plan may be orally communicated to employees:
If there are 20 or fewer employees in the same building
If there are 10 or fewer employees
After all employees review the written plan
After new employees are put through orientation
10
OSHA's Process Safety Management of High-Haz Chemicals includes flam liquids in quantities of:
10,000 pounds or more
1,000 pounds or more
100,000 pounds or more
50,000 pounds or more
11
OSHA requires that powered industrial truck operators:
Have truck operator's license&4 hours of supervised training
Have valid driver's license&4 hours of supervised training
Certified by the forklift instructor as competent&qualified
Be certified by the employer as trained and evaluated
12
True statement that applies when respirators with tight-fitting facepieces are required to wear
Facial hair is permitted
Fit testing is required
A medical exam is mandatory every year
Appendix D information required to be given to the employee
13
Walk/Work standard "all places of employment, passageways, storerooms, service rooms shall be"
Reliable and able to withstand weight placed in/on them
Approved by the building official and shall not be defaced
Kept clean and orderly and in a sanitary condition
Free and clear of obstructions
14
Lockout and tagout devices must be:
Standardized with red markings indicating an approved device
Made of metal with a plastic tag
Able to withstand a 20-lb strength test
Standardized in at least one color, shape or size
15
True statement regarding atmospheric hazards in permit-required confined spaces (permit spaces)
Methane gas is toxic, flammable, and is heavier than air
Oxygen above 19.5%, always safe to enter a permit space
Most hazards are seen or smelled, air monitoring not needed
Gases and vapors heavier than air accumulate in lower areas
16
Which glove type will protect against exposure to cleaning solvents containing mineral spirits?
Nitrile rubber
Insulating rubber
Leather work
Latex rubber
17
SubpartD states stairway railings are required on every flight of stairs having__or more risers
3
5
6
4
18
An employee is cleaning the parking lot and is injured as a result. Is the case work-related?
No, this area is not part of the work environment
Yes, covered under workers comp. even though not in building
No, this area is covered under Dept. of Transportation
Yes, conducting company business in the work environment
19
Purpose of equipment grounding conductor in a branch circuit or portable electrical equipment
Allow tools or equipment to operate without failure
Protect tools and equipment from electrical faults
Increase operating efficiency of electrical equipment
Protect workers from electrocution from fault/short in tool
20
Portable cord, plug connected equipment and flexible cords are required to be inspected
Once a week
At intervals determined by the on-site supervisor
Before use on any shift
Specified in the manufacturers labeling/listing requirements
21
Oxygen and fuel-gas cylinders should be separated by a minimum distance of __ feet?
30
20
15
22
A fire watch must be in locations where other than a minor fire might develop for __ after ops
15 minutes
one-half hour
one hour
two hours
23
Emergency exit routes are required to be well-illuminated, unobstructed and:
Ventilated with battery operated exhaust fans
Equipped with a public announcement system
Clearly marked
Contain pulsating strobe lights
24
What are the three basic hazardous areas of machinery that need safe guarding?
Point of operation, transmission, and control knobs
Brakes/trips, devices, and other moving parts
Front of machine, material handling equipment, back and side
Point of operation,power transmission apparatus,moving parts
25
Subpart Z requires exposure monitoring, protective clothing, training, housekeeping, and a(n):
Safety and health management program
Medical surveillance program
Lockout/tagout procedure
Employee wellness and fitness plan

OSHA #501 Review Flashcards | StudBud

OSHA #501 Review

25 termsStudBud Administration27 plays

OSHA #501 Review

Flashcards25 cardsFPractice quizPHost liveL

Questions 25

Answers

1
An employer's energy control program must contain the following:
Safety signs, electricl interlocks, training for sup and emp
Written program, qualified persons, insulated tools
Certified equipment, appropriate signage,supervisor training
Energy control procedures, training, periodic inspections
2
Electric power tools are very hazardous when used improperly, therefore power tools must:
Be fitted with guards and safety switches
Not be used by more than one worker
Not be stored near oxy-acetylene or other flammable gas cyl
Be used within 10 feet of their power source
3
Blades of a fan less than 7 feet above the floor - blade guards have openings no larger than_"
1"
1/2"
3/4"
1/4"
4
One method most often used to ensure that wheels for power abrasive grinder are safe to operate
Ring tests
X-rays
Speed calibration tests
Visual inspections by qualified persons
5
Permit-required confined spaces (i.e., permit spaces):
Confined space containing one or more serious safety hazards
Have only one way in and out
Can't be entered if atmosphere contains mo than 23.5% oxygen
Must be mechanically ventilated because of no natural vent
6
The OSHA standard on fire extinguishers (1910.157)
Covers placement, use, maintenance and testing of fire exts
Covers only those fire extinguishers which are used indoors
Requires sups and emps to be trained on the use of fire exts
Requires total evacuation in case of fire
7
How many gallons of Cat. 2,3,4 flammable liquid may be stored on shelves before need cabinet?
10
100
120
55
8
Class A fires involve:
Flammable or combustible liquids such as gasoline and oil
Electrical equipment such as appliances and circuit breakers
Ordinary combustible materials such as paper and wood
Combustible metals such as magnesium and sodium
9
The purpose and elements of a fire prevention plan may be orally communicated to employees:
If there are 20 or fewer employees in the same building
If there are 10 or fewer employees
After all employees review the written plan
After new employees are put through orientation
10
OSHA's Process Safety Management of High-Haz Chemicals includes flam liquids in quantities of:
10,000 pounds or more
1,000 pounds or more
100,000 pounds or more
50,000 pounds or more
11
OSHA requires that powered industrial truck operators:
Have truck operator's license&4 hours of supervised training
Have valid driver's license&4 hours of supervised training
Certified by the forklift instructor as competent&qualified
Be certified by the employer as trained and evaluated
12
True statement that applies when respirators with tight-fitting facepieces are required to wear
Facial hair is permitted
Fit testing is required
A medical exam is mandatory every year
Appendix D information required to be given to the employee
13
Walk/Work standard "all places of employment, passageways, storerooms, service rooms shall be"
Reliable and able to withstand weight placed in/on them
Approved by the building official and shall not be defaced
Kept clean and orderly and in a sanitary condition
Free and clear of obstructions
14
Lockout and tagout devices must be:
Standardized with red markings indicating an approved device
Made of metal with a plastic tag
Able to withstand a 20-lb strength test
Standardized in at least one color, shape or size
15
True statement regarding atmospheric hazards in permit-required confined spaces (permit spaces)
Methane gas is toxic, flammable, and is heavier than air
Oxygen above 19.5%, always safe to enter a permit space
Most hazards are seen or smelled, air monitoring not needed
Gases and vapors heavier than air accumulate in lower areas
16
Which glove type will protect against exposure to cleaning solvents containing mineral spirits?
Nitrile rubber
Insulating rubber
Leather work
Latex rubber
17
SubpartD states stairway railings are required on every flight of stairs having__or more risers
3
5
6
4
18
An employee is cleaning the parking lot and is injured as a result. Is the case work-related?
No, this area is not part of the work environment
Yes, covered under workers comp. even though not in building
No, this area is covered under Dept. of Transportation
Yes, conducting company business in the work environment
19
Purpose of equipment grounding conductor in a branch circuit or portable electrical equipment
Allow tools or equipment to operate without failure
Protect tools and equipment from electrical faults
Increase operating efficiency of electrical equipment
Protect workers from electrocution from fault/short in tool
20
Portable cord, plug connected equipment and flexible cords are required to be inspected
Once a week
At intervals determined by the on-site supervisor
Before use on any shift
Specified in the manufacturers labeling/listing requirements
21
Oxygen and fuel-gas cylinders should be separated by a minimum distance of __ feet?
30
20
15
22
A fire watch must be in locations where other than a minor fire might develop for __ after ops
15 minutes
one-half hour
one hour
two hours
23
Emergency exit routes are required to be well-illuminated, unobstructed and:
Ventilated with battery operated exhaust fans
Equipped with a public announcement system
Clearly marked
Contain pulsating strobe lights
24
What are the three basic hazardous areas of machinery that need safe guarding?
Point of operation, transmission, and control knobs
Brakes/trips, devices, and other moving parts
Front of machine, material handling equipment, back and side
Point of operation,power transmission apparatus,moving parts
25
Subpart Z requires exposure monitoring, protective clothing, training, housekeeping, and a(n):
Safety and health management program
Medical surveillance program
Lockout/tagout procedure
Employee wellness and fitness plan