cosmetology review pt.2

19;12. The lightness or darkness of a color is called the:

18;9. Disulfide bonds are chemical-based side bonds that are formed when:

13;20. A product used after a scalp treatment and before styling to remove oil accumulation is a:

17;9. A hand-knotted wig constructed for a secure fit with an elasticized mesh fiber base is a:

14;63. Cutting hair at the same length consistently, using a 90-degree elevation, produces a:

14;47. In using the wide teeth of a comb when cutting, comb the section first with the fine teeth and then:

14;57. The slicing technique removes bulk and adds:

14;7. The reference point that signals a change in the head shape from flat to round or vice versa is the:

18;2. All chemical texture procedures involve changing the hair structure using:

18;54. The strength of relaxers is determined by the concentration of:

17;7. The most expensive wigs are constructed using:

13;23. To avoid physical problems during the shampoo, the correct posture is to:

18;41. In extremely curly hair, the thinnest and weakest sections of the hair strand are located at the:

19;9. Hair w/ a tight cuticle resistant to moisture or chemicals is defined as having:

15;24. The point where curls of opposite directions meet forming recessed area is:

18;35. In permanent waving, the processing time should be determined by the:

14;51. A method of cutting or thinning hair where fingers and shears glide along the edge of the hair to remove length:

13;33. Dandruff is the result of a fungus called:

19;10. The predominant melanin that gives black or brown color to hair is:

14;23. A conversation where the stylist offers professional advice and suggestions to the client is the:

14;58. When performing the slicing technique on the surface of the haircut, it is best to work on:

19;34. All permanent hair color products and lighteners contain an oxidizing agent and an:

13;21. Brushing of the hair should never be done prior to:

15;13. Pin curls formed in the opposite direction of the hands of a clock are:

19;6. In individual hair strands, hair texture is determined by the:

14;46. The area of the head that has the most irregular growth patterns is the:

15;35. A styling aid that holds fine hair with little or no heaviness is:

19;23. A system that is used to understand color relationships is the:

17;14. When cutting a wig using a free-form method, move form longer to shorter lengths, working toward the:

18;56. Conditioners w/ an acidic pH that condition and normalize hair prior to shampooing are:

14;54. Vertical point cutting performed with shears on the ends of the hair:

15;16. Creating tension by forcing hair between the thumb and back of a comb when making pin curls is called:

19;16. Colors that absorb light and appear darker than their actual level:

14;3. In the haircutting procedure, reference points are used to establish:

16;30. Synthetic hair, human hair, or yarn can be added to a single braid to form a:

15;21. The panel of hair on which a roller is placed is the:

19;13. The system used by colorists to analyze the lightness or darkness of a hair color is the:

15.42.To clean residue from the barrel of a thermal iron, dampen a towel w/ soapy solution containing a few drops of:

18;4. The layer of the hair that provides strength and elasticity is the:

15;18. Two rows of ridge curls placed on the side of the head are:

19;33. The process of diffusing natural color pigment or artificial color from the hair is:

15;32. Classic styling brushes having rows of round-tipped nylon bristles should be:

18;28. A common, colorless reducing agent used in chemical texture services is:

18;52. Ammonium sulfite and ammonium bisulfite are marketed as:

18;62. When checking for test curl development, the test curl should reflect:

17;18. Synthetic hair colors used on wigs and hairpieces are standardized using:

14;65. Clippers and trimmers should be cleaned and the detachable blade and heel disinfected:

14;24. For a client with a long face, the stylist would recommend a style that:

15;15. Triangular based pin curls are used along the front or facial hairline to:

15;17. Pin curls sliced from a shaping and formed without lifting the hair from the head are:

14;53. The technique of removing excess bulk or cutting for effect without shortening hair length:

17;15. Recommended styling products for wigs should be formulated for:

15;19. Pin curls that allow the hair to flow upward and downward are called stand-up curls or:

14;18. The angle at which the fingers are held when performing a haircut is the:

17;4. The fastest way to determine whether a strand of hair is synthetic is to:

15;27. To smooth hair that is back-combed, the teeth of the comb or brush should be held at a:

18;63. When performing test curls, the rod should be unwound approximately:

17;20. Hairpieces w/ base openings that allow a client's hair to be pulled and blended are:

18;34. An endothermic wave must be activated using a(n):

14;60. A tool attached to clippers that cuts the hair to the exact length is:

13;17. Shampoos used to brighten or eliminate unwanted gold or brassiness are:

19;36. Temporary color pigment molecules do not penetrate because they are:

14;49. The term used to describe how hair is moved over the head is:

19;1. A key factor in determining appropriate haircoloring services is understanding the client's:

15;11. Pin curls formed in a shaping should begin at the:

14;40. A haircutting technique that maintains control of a subsection with regard to elevations and overdirection is:

18;31. The primary low pH reducing agent in acid waves is:

18;8. Permanent waves cannot be performed if the hair is coated with:

15;41. The edge of the beveled flat iron that is nearest the stylist is the:

18;65. When working with hair that has been chemically relaxed, you should avoid using:

16;8. Styles w/ parietal bangs that frame the face & minimize a wide forehead should be used for what facial shapes:

14;30. The haircutting tool used for close tapers in the scissors-over-comb technique is the:

14;50. When working with a razor, the ends are cut at an angle producing a softer shape w/ visible separation or:

14;33. The technique used to free up the dominant cutting hand to cut a subsection is called:

18;48. Relaxers containing one component used without any additional mixing are:

14;13. The straight line used to remove weight or create graduated layers are:

17;13. When performing a haircutting procedure on a wig,the general goal is to make the wig:

14;37. When cutting hair, a general rule of thumb is to stand or sit:

18;43. The active ingredient in all hydroxide relaxers is the hydroxide:

18;30. Most alkaline permanent waves have a pH between:

14;59. A version of the slicing technique that creates a visual separation in the hair:

14;56. Thinning hair to graduated lengths using a sliding movement with shear blades partially open is:

13;30. A scalp treatment used when there is a deficiency of natural oil on the hair or scalp should contain:

13;22. The most highly recommended hairbrushes are those made from:

14;10. A thin continuous mark that is used throughout a haircut is called a:

18;17. An indication of the strength of the side bonds is:

19;27. Red added to blue based colors will cause them to appear:

15;33. An ideal brush for blow-drying fine hair quickly and adding lift to the scalp area is a:

15;2. The first step in the hairstyling process should always be a:

14;48. In general a razor should not be used on curly hair as it will: