MyCLA MSSC: Safety - Review #1

Hard hats are NOT designed to protect you from electrical shock.

When welding, keep combustible material at least __________ away from the area.

Extension ladders should be leaned against a wall with a(n) ____ ratio of length to distance.

The most common chemical identifiers are the chemical name, the UN ID, and the _______ number.

Training in areas such as electricity and mechanical systems is referred to as ______ training.

A(n) __________ prevents a machine from operating without the proper guards in place.

A machine _ is a device that is designed to keep the operator clear of dangerous machine parts.

The leading cause of accidents with hand tools is improper use of __________.

The Permissible Exposure Limit (PEL) of a hazardous chemical is set by __________.

Lifting equipment must be operated within its __________.

What protection does a metatarsal guard provide?

Which hazard is caused by materials that cause infections or slowly damage the body over time?

Which of the following are NOT financial impacts of on-the-job injuries for your employer?

__________ is the primary reason for training.

Under which section of a HazCom label would you find first aid information?

__________ are chemicals that fuel the combustion of other materials.

Materials that can be fuels for fire are known as __________.

Who is authorized to remove a lockout/tagout from a machine?

After exposure to most chemicals the eyes should be flushed continuously for _________ minutes.

Forklifts, pallet jacks, and dollies are examples of __________ material handling equipment.

A red and white DOT placard indicates the material is a(n) __________.

OSHA requires forklifts be inspected __________.

If an employee discovers a fire, their first response should be to __________.

A class A fire __________.

The class of fire determines the __________.

In the event of an evacuation alarm, employees should __________.

OSHA requires __________ inspections of fire extinguishers.

Key steps to safe handling of gas cylinders include __________.

Federal regulations require fire extinguishers be labeled for __________.

An orange DOT label indicates the material is __________.

Why should chemical containers be stored upright?

Which agency certifies Personal Protective Equipment for workplace use?

A safe work place begins by designing in safety by creating a(n) __________.

When walking through a production area __________.

A consequence of work stations with poorly designed ergonomics is __________.

The highest priority reason for an OSHA safety inspection is __________.

OSHA requires elevated work surfaces to have guards it the surface is __________ above ground.

A __________ is a manually operated forklift.

Standard operating procedures (SOP) are detailed documents that __________.

The DOT label contains a 4-digit number that identifies the contents as assigned by the ______.

Wrenches, screwdrivers and hammers are examples of __________ tools.

Which of the following is evaluated during a hazard assessment?

Which of the following costs of workplace accidents affects employers?

Every Safety Data Sheet must follow the same format that has __________ sections.

Arm coverings can NOT protect you from cuts or puncture wounds.

______ presents info interactively with simulations, animations and, graphics on a computer.

PPE can protect you from injuries caused by equipment or dangerous chemicals.

A __________ shows the jobs each employee is trained to perform.

A trained __________ is responsible for making sure no one is injured during a lift.

Which type of ear protection is molded to fit your unique ear?

Eye & face protection must protect u from the specific hazards that u may encounter n your job.

______ is a system that rotates chemical stock to ensure they are used within their shelf life.

Safe handling procedures of chemicals are found in the __________.

Which of the following is a common cause of workplace death?

A sensor that stops a machine if a door is opened is an example of a(n) __________.

If an operator knows a safety problem exists with a machine, the operator should __________.

Practicing unsafe behavior does not impact anyone besides you. Is this statement TRUE or FALSE?

The __________ identifies the materials to be shipped and their potential hazards.

The job safety analysis should end with a(n) __________.

An OSHA inspector examines the workplace __________.

A ___ is a device or system that shuts down a machine immediately if the operator is in danger.

The Clean Water Act is enforced by which agency?

A job safety analysis should be performed __________.

The health hazard GHS pictogram covers radioactive elements & biological hazards.

Disposable air-purifying masks are effective protection to wear in oxygen-deficient atmosphere.

The plant where you work has 100 employees. The exit corridors must be at least ________ wide.

The number one type of work place training is __________.

If a safety violation is found, the inspector may __________.

Training courses should include a(n) __________ to show students have mastered the material.

A group of employees and managers who work together to keep a safe work space is known as ?

The process of identifying potential hazards in the workplace is known as a __________.

EPA regulations are designed to protect you from which of the following hazards?