MSSC: Safety - Review #1

If an operator knows a safety problem exists with a machine, the operator should __________.

A(n) __________ prevents a machine from operating without the proper guards in place.

The Permissible Exposure Limit (PEL) of a hazardous chemical is set by __________.

Training courses should include a(n) __________ to show students have mastered the material.

OSHA requires forklifts be inspected __________.

The number one type of work place training is __________.

A job safety analysis should be performed __________.

EPA regulations are designed to protect you from which of the following hazards?

A __________ shows the jobs each employee is trained to perform.

A sensor that stops a machine if a door is opened is an example of a(n) __________.

The __________ identifies the materials to be shipped and their potential hazards.

A __________ is a manually operated forklift.

The DOT label contains a 4-digit number that identifies the contents as assigned by the ______.

An OSHA inspector examines the workplace __________.

After exposure to most chemicals the eyes should be flushed continuously for _________ minutes.

Which of the following is evaluated during a hazard assessment?

______ is a system that rotates chemical stock to ensure they are used within their shelf life.

The process of identifying potential hazards in the workplace is known as a __________.

Which type of ear protection is molded to fit your unique ear?

Federal regulations require fire extinguishers be labeled for __________.

__________ are chemicals that fuel the combustion of other materials.

Training in areas such as electricity and mechanical systems is referred to as ______ training.

What protection does a metatarsal guard provide?

Wrenches, screwdrivers and hammers are examples of __________ tools.

Safe handling procedures of chemicals are found in the __________.

A safe work place begins by designing in safety by creating a(n) __________.

In the event of an evacuation alarm, employees should __________.

The Clean Water Act is enforced by which agency?

A class A fire __________.

A machine _ is a device that is designed to keep the operator clear of dangerous machine parts.

Forklifts, pallet jacks, and dollies are examples of __________ material handling equipment.

Arm coverings can NOT protect you from cuts or puncture wounds.

A ___ is a device or system that shuts down a machine immediately if the operator is in danger.

A group of employees and managers who work together to keep a safe work space is known as ?

Disposable air-purifying masks are effective protection to wear in oxygen-deficient atmosphere.

Which of the following is a common cause of workplace death?

Who is authorized to remove a lockout/tagout from a machine?

The highest priority reason for an OSHA safety inspection is __________.

Materials that can be fuels for fire are known as __________.

OSHA requires __________ inspections of fire extinguishers.

PPE can protect you from injuries caused by equipment or dangerous chemicals.

The plant where you work has 100 employees. The exit corridors must be at least ________ wide.

Key steps to safe handling of gas cylinders include __________.

Which of the following costs of workplace accidents affects employers?

If a safety violation is found, the inspector may __________.

Hard hats are NOT designed to protect you from electrical shock.

The most common chemical identifiers are the chemical name, the UN ID, and the _______ number.

If an employee discovers a fire, their first response should be to __________.

When walking through a production area __________.

__________ is the primary reason for training.

Practicing unsafe behavior does not impact anyone besides you. Is this statement TRUE or FALSE?

Which agency certifies Personal Protective Equipment for workplace use?

A consequence of work stations with poorly designed ergonomics is __________.

A trained __________ is responsible for making sure no one is injured during a lift.

Eye & face protection must protect u from the specific hazards that u may encounter n your job.

The class of fire determines the __________.

OSHA requires elevated work surfaces to have guards it the surface is __________ above ground.

Extension ladders should be leaned against a wall with a(n) ____ ratio of length to distance.

When welding, keep combustible material at least __________ away from the area.

hich hazards are caused by materials that cause infections or slowly damage the body over time?

Which of the following are NOT financial impacts of on-the-job injuries for your employer?

An orange DOT label indicates the material is __________.

______ presents info interactively with simulations, animations and, graphics on a computer.

The leading cause of accidents with hand tools is improper use of __________.

Under which section of a HazCom label would you find first aid information?

The health hazard GHS pictogram covers radioactive elements & biological hazards.

The job safety analysis should end with a(n) __________.

Every Safety Data Sheet must follow the same format that has __________ sections.

Why should chemical containers be stored upright?

Lifting equipment must be operated within its __________.

A red and white DOT placard indicates the material is a(n) __________.

Standard operating procedures (SOP) are detailed documents that __________.