stud
bud
Sign up
Log in
Home
Library
Explore
SAT
More
Concepts - Final Exam Review - Fall 2020 Flashcards | StudBud
Explore
/
Concepts - Final Exam Review - Fall 2020
Concepts - Final Exam Review - Fall 2020
87 terms
·
StudBud Administration
·
96 plays
Imported from external platform
Flashcards
87 cards
F
Practice quiz
P
Host live
L
Questions
87
Answers
1
This command in Onshape allows you to create a solid feature that extends outward, perpendicular to the sketch.
Revolve
Sweep
Extrude
Loft
2
Your overall career plan should...
Focus only on goals for the next 12 months
Change Monthly
Change Weekly
Contain both long and short term goals
3
A non-working, physical model of a proposed product is a ________?
simulation
snap-tie
mock-up
pinion
4
What is this measurement device called?
Caliper
Slide Rule
Tape measure
Micrometer
5
According to OSHA, Fire Extinguishers are marked with what color tape?
Orange
Red and white stripe
Blue and white stripe
Yellow
6
A student is interested in constructing buildings and roads. Which type of engineer would likely be best for her?
civil engineer
chemical engineer
electrical engineer
mechanical engineer
7
If I throw 5 axes at wooden target and all 5 stick into the wall above the target & they are very close together.
The throws are neither accurate nor precise
The throws are precise but not accurate
The throws are accurate and precise
The throws are accurate but not precise.
8
What happens if you squeeze calipers too tight when measuring an object?
The measurement will be more accurate
The measurement may read a few thousandths of an inch too small
The measurement may read a few thousandths of an inch too large
The batteries will die faster
9
Which of the following should NOT be done when performing an experiment?
Record you data accurately
Change only one variable at a time
Change your procedure during the experiment
Repeat the experiment multiple times
10
A parametric model made up of several parts in onshape.
Assembly
Part Studio
Document
Assemblage
11
The ISO is which of these organizations?
International Safety Organization
International Organization for Safety
International Organization for Standardization
International Standards Organization
12
Which of these subject is an engineer least likely to make use of when solving problems.
PE
science
writing
mathematics
13
If you are brainstorming, you are _____________________.
looking for all the advantages and disadvantages of a solution
coming up with as many solutions as possible
implementing solutions.
testing solutions
14
Which of the following is the correct answer?
Nope, not this one.
This is not the correct answer
This is the correct answer
There is no correct answer.
15
Which test will help you determine the strongest type of glue?
Timing to see how long each takes to dry completely
Measurement of the amount of load that each can withstand before failing
Weighing the each sample before and after drying
Comparing the cost per oz of each type of glue
16
What should be included on every page of an engineering notebook?
Sketches
Prototype testing data
The Date
Calculations
17
Isometric drawings are an example of _________ drawings.
Multiview
Orthographic
Oblique
Pictorial
18
Which part of this device is used for measuring the depth of a hole?
A
B
C
D
19
The letter “S” in OSHA stands for _________________.
Siding
Strength
Safety
structure
20
Engineers use this to keep detailed records of their design work & it can serve as documentation for securing a patent.
Engineering notebook
Narrative accounts
Google drive entries
Pencil sketches of a design
21
The way something functions, with respect to how it is supposed to work, is known as....
Performance
Design
Subtractive manufacturing
Additive manufacturing
22
Which of these agencies is responsible for ensuring that nature is protected from damage from mankind.
OSHA
EPA
UL
ISO
23
A detailed list of things that an engineering solution must be able to do.
Design brief
State the problem
Engineering requirements
Ergonomic design
24
Engineering is best described as
The use of electronics to improve the world
The building of machines
Construction activities
Use of math, science, and technology to create products & improve the world
25
Which part of this devise is used for measuring the outside diameter of a bolt.
C
A
B
D
26
Designing specifically for the tools you will use to make an object is called
Design for Manufacturability
Design for Maintenance
Design for Safety
Design for Assembly
27
On the improved ANSI Z535 safety signs, what color is the header on warning signs?
Blue
Orange
Red
Yellow
28
What does the CTSO "TSA" stand for?
Technology Student Association
Transportation Security Agency
Technology System of America
Television Standards Association
29
In order to select the best possible solution, all of the possible solutions must be __________.
evaluated
implemented
simulated
tested
30
Which of these measurement devices is the most accurate?
Ruler
Micrometer
Caliper
Tape Measure
31
When testing a prototype what is true of the data collected?
Neither quantitative nor qualitative data should be recorded.
Qualitative data is the most important
Qualitative and Quantitative data are equally important
Quantitative data is the most important
32
UL stands for what agency?
Unconditional Love
Underwriters licensing
Underwriters Laboratories
Unintentional Litigation
33
Ergonomics involves _________?
developing construction techniques for building a space
making the best use of our natural resources
designing products and structures to match human needs
using biotechnology to develop new construction materials
34
Which part of this devise would be used for measuring the INSIDE diameter or a cardboard tube.
A
B
C
D
35
If you need to measure something 100 feet long, what is the best tool to use?
Calipers
Ruler
Tape Measure
Tape Measure Reel
36
Which is NOT a step in the engineering design process?
Developing a prototype
Brainstorming
Selecting the best possible solution
Forming a hypothesis
37
Engineering field concerned with the design, construction, operation, and maintenance of machines and machine systems?
Chemical
Electrical
Mechanical
Civil
38
What is the biggest benefit from participating in an internship program?
It's a guaranteed way to get a job after high school.
You'll get high school credit for elective credits.
You'll develop on-the-job skills and mentoring contacts.
It's a great way to earn money for college.
39
What is an Engineer?
Someone who applies math, science, and tools to solve problems
Someone who operates, or is in charge of, an engine
Someone who builds things
Someone who drives a train or large truck
40
The process of planning the form of an object to meet its function.
Performance
Joinery
Manufacturing
Design
41
A full size working model of an engineering solution, which can be used for testing for function, is called what?
Protoje
Prototype
Menagerie
Mock up
42
EPA stands for what organization?
Engineering Protections Administration
Environmental Protection Agency
Environmental Placement Agency
Emergency Pulmonary Articulation
43
When an
an engineer tries to calculate how a solution will perform
before testing it.
Prototype development
Concurrent modeling
Predictive analysis
Calculated obsolescence
44
What piece of equipment is required while in the Materials Processing Lab?
Apron
Gloves
Safety Glasses
Lab Coat
45
These courses, and exposure to engineering projects, gives students advanced exposure to university level work.
science, mathematics, and engineering-related
team-based athletic
language arts, social studies, math, and science
AP, accelerated, and college prep
46
Which is not one of the four main branches of engineering?
mechanical engineering
civil engineering
electrical engineering
nuclear engineering
47
What does CNC mean?
Computer Numeric Control
Calibrators Need Calipers.
It is a type of additive manufacturing.
Computers Never Compromise.
48
According to OSHA standards, safe walkways through a work area are marked with what color tape?
Green and white stripe
Yellow
Red and white stripe
blue
49
A student is interested in transmitting power over long distances, what would be good major for them.
mechanical engineer
civil engineer
chemical engineer
electrical engineer
50
Recording how many seconds a device takes to complete the same task 10 times is an example of ______ data?
Qualifying
Quantitative
Qualitative
Quasimoto
51
Which of the following tools is used alongside a drill press to keep your drill bit secure when drilling?
Miter gauge
Jointer
Drill Bit
Chuck Key
52
Which of these agencies is responsible for ensuring that employees are safe in the workplace?
EPA
UL
ANSI
OSHA
53
These commands are used to put things together in Onshape.
Parametrics
Mass properties
Constraints
Intuitive
54
The number one priority in the Technology Lab is________________.
Play time
Safety
Quiet
Good Grades
55
Which of these agencies is responsible for testing consumer items and certifying that they are safe for use?
ANSI
OSHA
UL
PBS
56
Designing an object to be comfortable to use and accessible to people with disabilities is called designing for .....
Ergonomics
Maintenance
Simplicity
Sustainability
57
Engineers can learn valuable lessons from their designs in which of the following scenarios?
The divide is tested and it fails immediately
The device excels in some requirements, but fails in others.
The device performs exactly as designed
An engineer learns from all of these scenarios.
58
An object in an Onshape sketch that is NOT fully defined will be what color?
Black
Red
Green
Blue
59
Designing a mouse for a computer to fit well in your hand would demonstrate
what?
nuclear materials engineering
human factors engineering
waste management engineering
software engineering
60
When creating circular or cylindrical objects in Onshape, this command is used to create material around a central axis.
Sweep
Loft
Revolve
Extrude
61
When conducting engineering tests, data that CAN be measured in units is called ________.
qualitative
quantitative
vascular
validated
62
Engineering originally referred to what type of engineering?
private
commercial
military
civilian
63
Civil engineers may work on any of the following except
tunnels
bridges
roadways
automotive suspension
64
A systematic way of developing a solution to an engineering problem, that includes research, prototypes and testing.
Engineering Design Process
Engineering Design Protocol
Ergonomic Design Process
Scientific Method
65
An object is measured 10 times and each time the reading is the same and they are correct. These measurements are...
Precise and accurate
accurate but not precise
precise but not accurate
neither precise nor accurate
66
Which of the following tools is used to measure angles?
Level
Micrometer
Caliper
Protractor
67
Which of these is NOT true of an engineering notebook?
It must be completed in ink
It should be signed weekly
It should be free from mistakes
It should always be in English
68
If I throw 5 axes at a wooden target and all 5 hit the bullseye what can be said about my throws?
They are accurate and precise
They are precise but not accurate
They are neither accurate nor precise
They are precise but not accurate
69
Designing an object to have a low environmental impact is designing for _____
Durability
Cost
Sustainability
Manufacturability
70
Designing an object to last for a long time is designing for
....
Simplicity
Cost
Durability
Maintenance
71
In the design process, the step after building a prototype is typically what?
brainstorming
Testing
Marketing
Manufacturing
72
When conducting engineering tests, data that CANNOT be measured in units is called_____.
Vascular
Validated
Quantitative
Qualitative
73
What could you reasonably expect the deformation to be when you applied 40g?
14cm
27cm
40cm
20cm
74
In which step of the engineering design process would an engineer complete a post-analysis?
Research and refine
Brainstorming
Testing the prototype
Evaluate and Report
75
A student wants to create technologies to produce new pharmaceuticals. Which type of engineer would she likely enjoy?
chemical engineer
civil engineer
mechanical engineer
electrical engineer
76
When using a digital caliper, it is important to do which of the following before taking a measurement.
De-magnetize the slide
Recharge the battery
Zero the caliper with the slide fully closed
Fully open the slide and close it again
77
Analyzing a prototype to see if it works as predicted is called ________.
value analysis
structural analysis
functional analysis
Value added analysis
78
Combines elements of other disciplines to devise efficient system for workers, materials, energy use and communications.
Industrial
Chemical
Electronics
Electrical
79
Which of the following pieces of PPE is NOT appropriate for use around spinning machinery?
Safety glasses
Closed-toe shoes
Gloves
Hearing Protection
80
Which type of ANSI sign IS NOT required to have an exclamation point inside of the triangle in the heading.
Safety
Caution
Warning
Informational
81
The Cloud-based parametric modeling software that we’ve been using this semester.
TinkerCad
Inventor
Solidworks
Onshape
82
Designing an object with primary concern for the final product’s appearance is designing for ____
Aesthetics
Ergonomics
Simplicity
Inspection
83
Designing an object to be easy for the user to put together, such as how Ikea does it, is designing for _____
Cost
Assembly
Maintenance
Safety
84
What is the best way to test a prototype?
Weight it
Collect survey data about its marketability
Make it do what it was designed for
Attempt to break it.
85
When testing a paper beam, you notice that it twists as it fails. What type of data is this?
Quantitative
Irrelevant
Qualitative
Unimportant
86
What is the organization that sets and enforces protective workplace safety and health standards?
Environmental Protection Agency (EPA)
Occupational Safety and Health Administration (OSHA)
Underwriter Laboratories (UL)
International Organization for Standardization (ISO)
87
Sharp instruments should be carried in the following manner.
Carried in your back pocket
Wrapped inside of a towel
Pointed down and away from you
Pointed out away from your body
