T2 Unit 3 Review

Secondary protection from gas blowby shall be provided by

Primary protection from gas blowby is provided by

The detectable abnormal condition which indicates gas blowby may occur is

A document that lists components and ESS with required safety devices and lists the functions

Pressure in excess of the maximum allowable working pressure is referred to as

The lessee shall not create conditions that will pose unreasonable risk to

Gas blowby is defined as

Secondary protection from the undesirable event of a small liquid leak shall be provided by

The detectable abnormal conditions for excess temperature in a fired component are

Underpressure is defined as

Temperature in a process component in excess of the rated working temperature is

Any method used on aplatform to collect and direct escaped hydrocarbons to a safe location is

The major parts of the Emergency support system are

To determine if pollution is occurring, drilling and production facilities shall be inspected

A leak is defined as the accidental escape of ________ to the atmosphere

Primary protection from liquid overflow is provided by

Low pressure, low level, and backflow are detectable abnormal conditions for

The purpose of the production platform safety system is to

A system of manual stations which, when activated, will initiate a platform shutdown is the

Secondary protection from liquid overflow to a downstream component should be provided by the

The purpose of a production platform Surface Safety System is to protect

Liquid overflow is defined as

The major objective of the platform safety system is to

Written confirmation of spills shall be received by the Regional Supervisor of BSEE by

Departing pipelines shall be equipped with a

The Safety Analysis Tables (SATs)

The detectable abnormal condition which indicates overflow may occur is

Oil spills of one barrel or more shall be reported orally to the Regional Supervisor of BSEE

The SDV and PSHLs on crossing pipelines shall be connected to the platform

If you observe an oil spill from your facility you must immediately notify

The lessee shall maintain safety records and safety device paperwork for a period of

If you see a spill from antoher rig, wh should you notify?

An adverse occurrence in a process component which poses a threat to safety is a(n)

In fired process components, excess temperature can be caused by

Incoming pipelines to a platform shall be equipped with

Process components shall be protected by two levels of protection which are

The Safety Analysis Checklist (SAC)

Combustible vapors over that required for normal ignition of either the pilot or main burner is

Secondary protection from liquid overflow to the atmosphere shall be provided by