CHAPTER 28-Monomer Liquid & Polymer Powder

an alternative when a hand washing station is not available

Proper maintenance of nail enhancements should be done every _____.

removal, monomer liquid and polymer powder enhancements should be soaked for

Monomer liquid and polymer powder nail enhancements are _____ services.

As monomer liquid absorbs polymer powder, the chemical interaction produces a small

substance found in polymer powder, that when activated by a catalyst, will spring into action

Odorless products harden more slowly, which creates the tacky layer called the ___

MONOMER LIQUID ABSORBS POLYMER POWDER, THE PRODUCT FORMED AT THE TIP OF THE BRUSH IS CALLED __

formed by combining many small molecules (monomers) into very long, chain-like structures?

created when nail art is sandwiched between two layers of product while the nail enhancement

the curved line where the pink and white areas meet each other on a French manicured nail?

Sculptured nails are created by combining monomer liquid with _____

runs straight from the cuticle down the side or wall of the nail to the end of the extension.

buffer used to create a high shine on a natural nail or a nail enhancement

Additives such as ____ are blended with polymer powders to produce a wide range of color shades

nail supply is placed under the free edge and used as a guide to extend a nail enhancement?

abrasive is used for finish filing, refining, and buffing.

abrasive is used for initial shaping of the perimeter of the nail,refining surface shape a nail

Use of a nipper to clip away loosened nail enhancements can _____.

Masks are designed to prevent inhalation of excessive dust, but they offer no protection from

For natural-looking nails, product application near the eponychium, sidewalls, and free edge

Mono means one and mer stands for units, so a monomer is one unit called a(n) _____.

brushes should not be used because they hold excessive amounts of liquid?

When lightly tapped with the handle of a brush, hard nail enhancements make _____.

additives are added to monomer liquid to speed up chemical reaction or curing time?

Monomer liquid and polymer powder should be stored separately in covered containers in

Special containers used to hold monomer liquid and polymer powder

primers were developed because acid-based nail primer is corrosive to the skin

When using the brush to shape the enhancement on the free edge area, use _____.

abrasive is strong enough to thin enhancement product in order to prepare the enhancement

product is used on the natural nail prior to product application to assist in adhesion?

Polymer powder is made using a special chemical reaction called __known as curing or hardening.

also known as the arch, is the area of the nail with the most strength

What are pre-formed nail extensions made from ABS or tenite acetate plastic?

_____ is a widely used monomer with a long history of safe use in medical and dental products,

applying nail enhancements, surface moisture and natural oils left on the nail plate will ____

What term describes any art or design that protrudes from the nail?

PREVENT CONTAMINATION , DAPPEN DISH SHOULD HAVE ___

The amount of polymer powder and liquid monomer used to create a product bead is called the ___

initiator added to polymer powder to start the chain reaction of curing the nail is _____.

When removing softened nail enhancement products, use a wooden or metal pusher and _____.

Too much powder in a mix ratio causes nail enhancements to cure incorrectly and become _____.