Which activity gives students the most opportunities to learn the importance of teamwork?

developing skills in parliamentary procedure

What effect does a clean& organized shop have on the chance of accidents happen as compared to a dirty disorganized shop

Accidents will be less likely to occur in a clean shop.

Cracking and scaling of paint are caused by:

the surface expanding and contracting.

The last movement when sanding wood with a portable belt sander is to:

lift the sander off the wood while it is still running.

Outdoor wire classified as UF is used to:

bury underground as feeder wire.

The category of agricultural mechanics that includes irrigation and waste disposal is:

soil and water mechanical practices.

An example of a Service-Learning Immersion Supervised Agricultural Experience is:

offering free marketing for summer welding course at the community college

studbud

Ag Mech. exam

100 termsStudBud Administration1 play

Imported from external platform

Flashcards100 cardsFPractice quizPHost liveL

Questions 100

Answers

1
Which activity gives students the most opportunities to learn the importance of teamwork?
preparing and presenting a speech
developing skills in parliamentary procedure
speaking extemporaneously in public
memorizing and reciting a creed
2
To be certain that accurate readings are taken, the bubble in the leveling vial of a farm level should be checked:
once a day.
after each reading
every hour.
before and after each reading.
3
Which saw is used to cut across the grain of wood?
hand ripsaw
hand crosscut saw
hacksaw
coping saw
4
The type of handsaw used to cut wood with the grain is a:
hand crosscut saw.
coping saw.
hand ripsaw.
combination saw.
5
A try square is used to mark:
30° angles.
curves
15° angles.
90° angles.
6
What effect does a clean& organized shop have on the chance of accidents happen as compared to a dirty disorganized shop
The occurrence of accidents will not be affected.
The number of accidents will double in a clean shop.
Accidents will be more likely to occur in a clean shop.
Accidents will be less likely to occur in a clean shop.
7
Jame measure and marks a board correct If he saw on the waste side of the line leaves line the size of the board will be
longer than needed.
the appropriate length.
shorter than needed.
thicker than needed.
8
A person who must be skilled in checking machinery for quality is a/an:
accountant
sales representative.
teacher.
inspector
9
Jacob plans to build a birdhouse a nail box a toolbox and a cattle feeder. Which be built from the strongest lumber
nail box
cattle feeder
toolbox
birdhouse
10
What color in the safety color code identifies the location of safety and first aid equipment?
green
orange
red
blue
11
Debts that a business owes are:
assets
net worth.
liabilities
equity
12
Cracking and scaling of paint are caused by:
the improper mixing of thinner and oil
the surface expanding and contracting.
moisture in the wood at the time of painting.
using a paint containing too much oil.
13
What portable power tool is used to make round holes through wood or metal?
grinder
miter saw
drill
sander
14
What is the unit of measurement of electrical pressure?
volt
kilowatt
ohm
resistance
15
When Barry started welding, there was a lot of spatter, and his bead was flat. What caused the spatter and flat bead?
amperage too low
amperage too high
travel too fast
arc too short
16
A disadvantage of painting with a paint brush, rather than a spray gun, is that the:
spray gun is slower.
spray gun is less expensive.
paint brush is faster.
paint brush is slower.
17
Which type of Supervised Agricultural Experience uses the scientific process to discover new knowledge?
Experimental
School-based Enterprise
Service Learning
Entrepreneurship
18
What type of electrode is most commonly used when welding farm projects?
E6011
E7084
E6041
E8015
19
What pliers are used to reach into recessed areas?
vise-grip pliers
slip-joint pliers
side-cutting pliers
long-nose pliers
20
If a welder wants to mark metal so that there will be a scratch or permanent mark, he/she should use:
an awl.
a pencil.
soapstone.
chalk
21
r requires 5 amperes of electricity, 120-volt electrical circuit, (Formula: W = V × A)
0.25
24
900
600
22
As technology, the number of people and the number of homes with lawns increase the agricultural mechanics industry will
cease to exist.
get smaller
remain weak.
remain strong.
23
What method used to fasten wood is quick but is also the weakest method?
screws
biscuit joints
nails
bolts
24
What power tool is used to straighten and smooth edges of boards and to cut bevels?
grinder
planer
drill
jointer
25
How many sheets of 4×8 exterior-grade plywood dare needed to cover an outside wall of a build that is 8 high and 44 long
16
22
11
15
26
Who is responsible for constructing terraces to control erosion?
lawn equipment mechanic
builder
soil conservationist
electrician
27
Janna discovers a major problem in balloon-type framing is that there is/are no:
pitch to the roof.
platform to stand on.
trimmer studs to cut.
ceiling joists for nailing
28
Where should construction of a building start?
on the front side
on the back side
at the bottom
at the top
29
The last movement when sanding wood with a portable belt sander is to:
lift the sander off the wood while it is still running.
turn the sander off and leave the belt on the wood.
lay the sander on its left side while it is still running.
lay the sander on its right side while it is still running.
30
Compared to entry-level jobs, professional careers usually require:
more manual labor.
outside work and manual labor.
less education.
licenses and certification.
31
When unused, a portable belt sander should be laid:
upside down.
on its side.
on the belt.
on the handle.
32
Shannon is building a shop. What is the first thing she needs to do before starting to construct her building?
buy lumber
study plans
pay workers
get subcontractors
33
Outdoor wire classified as UF is used to:
wire inside lights.
provide mechanical protection where the wires enter and leave the ground
bury underground as feeder wire.
provide service inside buildings in areas with moisture.
34
immersion Supervised Agricultural Experience would have a sum prese show test results for the strengths of diff welds
Experimental
Placement
Entrepreneurship
School-based Enterprise
35
When laying out a building, taking two equal measurements of the diagonal corners means that the four corners are:
triangles.
not square.
not plumb.
square.
36
A list of items to be addressed at a business meeting is the:
treasurer’s report.
minutes
agenda
committee reports.
37
How many watts make up a kilowatt?
10
1000
20
90
38
The tool used for ripping and prying wood is the:
half ratchet.
wrecking bar.
sledgehammer.
rubber mallet.
39
A hammer drill is used to drill holes in:
plastic
masonry.
metal
wood
40
If a project is made using both wood and metal, the wood should be fastened to the metal by using:
bolts
welding
nails
glue
41
Which hand(s) should be used when operating a portable belt sander?
left
right
both
neither
42
What type of bolts should be used as fasteners for lightweight metal structures?
stove
carriage
plow
machine
43
The depth of cut for a jointer is determined by adjusting the:
rear guard.
front guard.
front infeed table.
rear outfeed table.
44
What is used for lubrication when a die is used to cut threads on a metal rod?
glue
gasoline
water
oil
45
The category of agricultural mechanics that includes irrigation and waste disposal is:
electrification, power, and controls.
soil and water mechanical practices.
power machinery operation.
structure, equipment, and facilities.
46
Nicole make doors birdhouse, a doghouse, a cattle barn, and a storage building. What door made from the strong materials
birdhouse
cattle barn
doghouse
storage building
47
An example of a Service-Learning Immersion Supervised Agricultural Experience is:
running a custom fence-building and repair business.
offering free marketing for summer welding course at the community college
working for an irrigation service company.
comparing and contrasting different styles of tillage equipment.
48
Which procedure guarantees that more than one member wants an item of business brought before the group?
second the motion
adjourn the meeting
take from the table
division of the assembly
49
What tool is used to cut curves in wood?
miter saw
hatchet
crosscut saw
coping saw
50
Steve is use a build level to lay out a building, the degree reading when the telescope is turn to mark a corner should
45
30
90
15
51
When using two three-way switches and one four-way switch, how many traveler wires should be used?
three-outlet extension cord
duplex receptacle
power strip
15-amp 240-volt receptacle
52
What stationary power tool uses a blade with back-and-forth motion to cut metal?
table saw
drill press
grinder
power hacksaw
53
In a business meeting, the chairperson displays the symbol of authority by using the:
official jacket.
treasurer’s report.
gavel.
U.S. flag.
54
An example of a foundational, agricultural literacy Supervised Agricultural Experience activity is:
list of 10 personal strategies that enhance verbal and nonverbal communicat
5 welding tools and putting the tools away using proper safety procedures
discuss public policies that affect robotics used in ag the interview
writing a sumof the benefits and limitations of a financial manage tool
55
Sandy uses a hammer to drive small nails, Nicole uses a hammer to drive large nails compared Nicole's hammer should be
lighter
the same color.
heavier.
the same weight.
56
Lori The things she learned can best be used later in an agricultural engineering association to
set goals and develop plans.
cook and serve food.
keep financial records
conduct safety inspections.
57
A round- or flat-headed fastener that is threaded the entire length and has a nut is a:
sheet-metal screw.
stove bolt.
machine bolt.
lag screw.
58
When a try square is used to mark a board, the:
handle should be held firmly against the center of the board.
handle should be held firmly against the edge of the board.
handle should be held loosely against the edge of the board.
blade should be held firmly against the edge of the board.
59
The best tool to cut a V in wood that the top of a flat head screw will be flush with the wood or just below its surface
pipe reamer
drill bit
sander
countersink
60
What type of nail has a flat head and diamond-shaped points?
finishing
casting
brad
common
61
A gasoline fire is a Class B fire because the fuel is a/an:
combustible metal.
ordinary combustible.
flammable liquid.
nonflammable liquid.
62
What is the amperage of a circuit with ten 60-watt light bulbs in a 120-volt circuit?(Formula: A = W ÷ V)
5000
5
50
10000
63
What portable power tool is used to make straight cuts in wood?
metal shears
cordless drill
circular saw
hacksaw
64
The two things that combine to cause hearing damage from noise are the hours exposed and the level of noise measured in:
ohms
decibles
foot-pounds
liters
65
How many square feet of flooring are needed for a 20' × 20' building?
20
400
250
50
66
The local rate for electricity is $0.13 per kilowatt hour, how much should the electric bill be for 120 kilowatt-hours
15.60
10.20
2.50
6.80
67
What welder produce a weld that is strong & free of corrosion than other welders when welding stainless steel o aluminum
DC reverse polarity SMAW
DC straight polarity SMAW
TIG
AC SMAW
68
Indoor electrical wire used to provide service in areas with moisture or without moisture is classified as:
USE
SE
TW
UF
69
When using two three-way switches and one four-way switch, how many traveler wires should be used?
two
four
one
eight
70
The type of sandpaper that should be used to remove the most amount of wood when sanding is:
very fine.
medium
fine.
coarse.
71
To help avoid mistakes and to reduce the amount of wasted materials, a good rule to follow is:
measure twice, cut once.
saw out the marked line.
measure once, cut twice
measure with three different tapes.
72
The tool used to find and transfer various angles is the:
zigzag rule.
T-bevel.
chalk line reel.
level.
73
What is used to protect the eyes of a welder from the light rays?
electrode flux
welding gloves
welding helmet
safety glasses
74
On a board fence, the fence will be stronger if the:
joints are staggered.
boards are thinner.
posts are smaller.
joints are on the same posts.
75
Lori sanded her wood tabletop very careful she has scratch marks in several places What caused the scratches in the wood
using oak wood
using fine sandpaper
sanding across the grain
sanding with the grain
76
Toggle, mercury, silent, rocker arm, and push button are types of:
three-way switches.
single-pole switches.
four-way switches.
five-way switches.
77
Silas proposed selling trailers for $400 as an FFA fundraiser. Hannah moved to refer the matter to a small group more st
amend the motion.
call for a division of the house.
adjourn the meeting.
refer the motion to a committee.
78
What portable power saw is used in tight situations for remodeling work?
circular saw
table saw
miter saw
reciprocating saw
79
The major advantage of using parliamentary procedure in a business meeting is that:
teachers have more control over meetings.
students learn how the courts work.
business is conducted fairly and quickly.
a small minority can control the meeting.
80
The saw used to cut angles is the:
hacksaw
hand ripsaw
miter saw
hand crosscut saw
81
When a builder is using platform framing, the subfloor is nailed to the:
joists
sill
top plates
girder
82
A Western Union splice is used:
with wire nuts.
in the western part of the United States
where four or more wires are joined.
where strength is required in a splice.
83
Lee used one tool as a plumb, depth gauge, inside and outside try square level miter square, and marking gauge
combination square
try square
level
plumb bob
84
What wire welder is used in industry as an automatic welder?
AC/DC SMAW
MIG
oxyacetylene
TIG
85
A stationary power tool with abrasive wheels or wire brush wheels used to sharpen tools shape metal, or remove rust is a
hacksaw
hammer drill.
drill press.
grinder.
86
The power tool that moves to cut a stationary piece of material is the:
table saw.
planer.
jointer
radial arm saw.
87
What color in the safety color code is used to improve visibility by highlighting edges of machines?
red
ivory
orange
yellow
88
sell fruit, it became apparent that a small group could better make the decision. How can appoint to act for the chapter
by moving to refer to a committee
by taking the motion to sell fruit from the table
by rising to a point of order
by calling for a division of assembly
89
Which fire extinguisher is good for only wood fires?
foam extinguisher
pressurized water extinguisher
dry chemical extinguisher
carbon dioxide (CO₂) extinguisher
90
Supervised Agricultural Experience includes plan implementing operating and assuming financial risks for a welding bus
Placement
Entrepreneurship
Analytical
Service Learning
91
A ripsaw blade is used to:
make rounded molding.
drill holes in metal.
cut with the grain of the wood.
cut circles in wood.
92
Agricultural mechanics is a branch of:
anatomy
chemistry
biology
physics
93
Where should the bottom saw teeth point on a portable circular saw blade used to cut wood?
toward the front of the saw
toward the rear of the saw
toward the rip fence
toward the center of the blade
94
Moisture in wood or on the wood’s surface will cause paint to:
last longer.
be smoother.
blister and peel.
be brighter.
95
An example of an analytical Supervised Agricultural Experience is:
studying why different types of lighting systems are used in farm buildings
restoring a tractor with other FFA members at school.
building garden sheds for homeowners.
working for a plumber.
96
Which book is best for the club parliamentarian to purchase as the authority on parliamentary procedure?
FFA Advisor’s Manual
N.C. Pesticide Manual
FFA Student Handbook
Robert’s Rules of Order
97
8 kilowatts of electricity when operated for 10 hours in a 120-volt circuit?((Formula: A = W ÷ V)
5.33
8.00
6.67
5.00
98
When Jan uses platform-type framing, where is the top plate attached?
on top of the rafters
above the ceiling joists
below the studs
on top of the studs
99
What saw uses a blade that moves back and forth to cut curves?
circular saw
band saw
table saw
jigsaw
100
Which type of teeth should a saw blade have to make a smooth cut?
rip
coarse
fine
broken

Ag Mech. exam Flashcards | StudBud